Can rigid PVC transparent board be used as a shower door?

Updated on Shower room 2024-04-11
1 answers
  1. Anonymous users2024-01-23

    Transparent PVC Rigid Board: Thickness: 1-20mm Maximum Width: Transparent PVC Sheet is non-toxic, hygienic, good weather resistance, high strength, good transparency, and its physical properties are better than plexiglass Transparent PVC board is widely used in equipment guard boards, drinking water tanks, liquid level display containers, etc

    Personally, I don't think so, see the above parameters.

Related questions
2 answers2024-04-11

PVC material is a kind of plastic decorative material, is the abbreviation of polyvinyl chloride material, PVC (Polyvinyl Chloride, referred to as PVC) resin is a thermoplastic polymer polymer polymerized by vinyl chloride monomer (Vinyl Chloride Monomer, referred to as VCM). It is made of polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, modifier, etc., through mixing, calendering, vacuum blister and other processes. PVC is an amorphous polymer containing microcrystals with a crystallinity of 5%-10% (melting point 175 degrees). >>>More

2 answers2024-04-11

Not good, use a plastic pad with a plastic wire on the surface and a smooth reverse side.

1 answers2024-04-11

PVC gusset is also the plastic board we often see, PVC gusset is light in weight, waterproof, moisture-proof, heat insulation, not easy to burn, no vacuuming, easy to clean, more suitable for kitchen, bathroom ceiling decoration. But compared to metal ceilings, PVC ceilings are slightly inferior. How about a PVC ceiling? >>>More

1 answers2024-04-11

Under normal circumstances, we will choose the buckle plate in the kitchen to be painted more, there are a few with brushed, that is also a good process in the roller coating, not many people in order to save money when the film board, the former cleaning because it is in the kitchen, there will be oil stains, then use a small amount of dish soap on it, but there should be enough water to mix, to use a softer, better absorbent cloth to scrub after water, it doesn't matter if you can use force in the middle, but when you are around, the force should be light. In particular, pay attention to not hard cloth and cleaning balls and the like, as soon as you scrub it, it will leave a lot of small wires on the shiny panel, damaging the gusset, at this time, if it is a roller coating, it is not good, if it is a film, it is not good. Another point is that if you use the kind of cheap differential plate, heavy one, then be careful, because it has a lot of iron components in it, not an aluminum-magnesium alloy gusset, so after seeing water, it is easier to rust. >>>More

3 answers2024-04-11

The steps of disassembling and assembling the PVC ceiling gusset are as follows: >>>More