Can bathroom ceilings get moldy?

The bathroom is the most humid place in the home, so special attention should be paid to moisture, if the moisture-proof measures are not done, it is very likely to make the ceiling damp and cause mildew, not timely treatment is easy to make the mold spread, affecting the health of the family, the following decoration home network will teach you the treatment and prevention methods after the bathroom ceiling mold.

First of all, what we need to do is to check the ceiling or corner of the bathroom for water seeping out, find the cause of mold on the ceiling, if it is caused by water seepage or too high humidity in the bathroom, we must find a way to solve these problems. You can also use a professional wall mold remover, which can completely kill the wall mold in a short time, and at the same time, you can also change the wall structure of the corresponding part to prevent the growth of wall mold.

Moldy treatment of bathroom ceilings.

Then there is the treatment of the ceiling in the bathroom. You can wipe it with a cloth soaked in disinfectant alcohol first, and if it is not too serious, you can wipe it two or three times to remove the mold. Another way to get rid of mold is to use 84 disinfectant.

However, it tends to irritate the skin, so remember to wear rubber gloves and rinse off with water.

Bathroom ceiling mold cure.

Paint with better waterproof performance can be selected. Let the damp ceiling dry for one to two months, and then brush a layer of cement-proof slurry on the ceiling to prevent moisture. Secondly, use gypsum putty to fill the ceiling pits and hemp surfaces, then scrape the putty, and after drying, use sandpaper to smooth the ceiling, repeat twice, and clean it.

Next, the base coat can be applied twice with a paint roller on a dry and clean ceiling, or it can also be sprayed, and that's it.

When we use the bathroom, it is best to open the bath bomb to increase the temperature of the bathroom, so that mold is not suitable for breeding, usually open more windows for ventilation, buy some charcoal and other desiccants in the bathroom is also a good way to dehumidify and remove moisture. If mold has spread to the wall, a professional wall mold remover can be used.

Because the corrosion resistance of your ceiling is not good, the mildew prevention is not good, the material is not advanced enough, like the kitchen and bathroom ceiling series of AIA ceiling will be coated with an anti-oxidation layer behind it, which is more corrosion-resistant and mildew-proof. . .