-
Anonymous users2024-01-23There is no hidden danger, that is, the bath bomb bulb consumes a lot of power, and you can replace one of the bulbs with an LED bulb of about 15-25W. It is best to replace the lighting fluorescent lamp with an LDE lamp.
-
Anonymous users2024-01-22The possible reason is that the power cord diameter is too thin, the power supply voltage is insufficient, and the main line of the line is not connected firmly
-
Anonymous users2024-01-21The wire diameter is too thin or the interface contact is poor.
Hello, the light outside the bath bomb bathroom is turned on, two of the lights are on, and these two lights are not controlled by the switch in the bathroom, then a switch can be installed separately to control these two lights. >>>More
Hello, it is recommended to take the dark line, because it is more beautiful. >>>More
If it convulses too quickly, won't it drain the heat quickly in winter? This is a matter of design, and when you buy it, ask if there is a speed-regulating type of exhaust to meet the needs of various time periods.
There are only two possibilities for dry tripping, short circuit or overload. You turn off all the switches on the lights and see if you can send them on. Generally speaking, the probability of a problem with the line is very small, try to change the middle bulb.
The output voltage and power can be the same, of course, the block cannot be larger than the original, otherwise it will not fit.