The glass glue under the toilet bowl can not make a bulb bake

Updated on Toilet 2024-04-27
3 answers
  1. Anonymous users2024-01-23

    The curing of glass glue not only requires a certain temperature but also an oxidation process, generally the surface cures for 4 hours, and it takes 24 hours for complete curing, so heating and roasting with a bath bomb bulb cannot accelerate the curing (unless the room temperature is lower than 10 degrees).

    The cured glass glue will burn if the temperature reaches 300 degrees Celsius for a long time, so it is best not to bake it.

  2. Anonymous users2024-01-22

    There may be a problem with the glass glue.

  3. Anonymous users2024-01-21

    It can't be used, just natural ventilation.

Related questions
1 answers2024-04-27

Natural aging, that's okay. If it doesn't turn black, it's a good glass glue. A lot of glass glue will turn black after too long. Pay attention to when choosing glass glue.

2 answers2024-04-27

You first wipe the leak with water, then apply glass glue, let the toilet be disabled for eight hours, and then try again.

1 answers2024-04-27

It is recommended to use neutral silicone glue, which has no odor and good adhesion. For all glass adhesives, the general curing time is about 24 hours. The better quality ones are faster.

1 answers2024-04-27

The water resistance of glass glue is not good. It is possible that it will be poured by rain when it is not dry, of course, the possibility of glue quality problems is also very large, it is recommended to squeeze out a little and put it indoors to see the curing situation. >>>More