-
Is there a problem with your fan wiring? Just check that the wiring is well adjusted.
-
You'll need to pull 3 more wires into it. Control the exhaust air and warm air, and the zero line also uses the zero line of the original lamp.
-
It should be a wiring error, it is recommended that you find a knowledgeable electrician to reinstall it, if not, you can only find the product after-sales maintenance!
Probably not, the heating exhaust fan in the bathroom is on the bath bomb, and the ventilation exhaust fan should be installed on the wall to pump the air out of the bathroom.
There may be a wiring problem with the exhaust fan in the bathroom, the power supply of the exhaust fan switch (live wire) is taken from the socket, and the neutral line of the exhaust fan is connected to other lines or ground wires, resulting in an unbalanced total leakage current and tripping, but because the power of the exhaust fan is small, the current is also small and close to the total leakage current, so sometimes it may not jump. >>>More
If it is confirmed that the power supply line of the exhaust fan has been disconnected, the rotation of the exhaust fan is a natural rotation, that is, the rotation caused by airflow.
6 inches are already 20cm, which is theoretically possible. However, the exhaust fan can only be put in the exhaust port, and you have to consider the problem of fixing, so it is recommended to buy a smaller one.
1. It cannot be installed, that is, the size of this opening is a little smaller. >>>More