Is it enough for household electricity, 4 square copper wires for kitchens and bathrooms?

Updated on Kitchen 2024-04-02
6 answers
  1. Anonymous users2024-01-23

    The bathroom instantaneous water heater is 8500 watts, and there are bath bombs, 4 square meters is definitely not enough.

  2. Anonymous users2024-01-22

    The kitchen and bathroom are laid with 4 square meters of plastic copper wire, which can meet the requirements of use.

    In addition, if the bathroom chooses an instantaneous water heater, it is necessary to lay 4-6 square power cables separately from the distribution box (the specific needs to be determined according to the power of the instantaneous water heater).

  3. Anonymous users2024-01-21

    Enough, branch lines can also use 2,5 lines.

  4. Anonymous users2024-01-20

    The kitchen is recommended to use 6 square meters! It's time to take the special line! Reasonable layout planning in the early stage is very important!

  5. Anonymous users2024-01-19

    Generally, most household appliances are in the kitchen and bathroom, four square is enough, and the square line in the room can be used.

  6. Anonymous users2024-01-18

    No, it doesn't. It is recommended that the kitchen is better than 6 square meters, and a switch box is added to the kitchen to control the electric kettle, induction cooker, rice cooker, refrigerator, washing machine, etc., and each group uses a square line.

    Each plug-in air conditioner is controlled separately by a set of wires. If you want to control together, 6 square is better.

    The leakage switch should be divided into several circuits, and each circuit is connected to a group of wires, so you don't have to worry about bad wiring! If it is not a split air conditioner, the air conditioner must be protected by a leakage switch separately, please note that the zero line behind the switch should not be shared with other electrical appliances.

    In the past, lighting and plug-in was a circuit, and it was found inconvenient during maintenance, and the plug-in was tripped, and the lighting could not be seen, so it must be divided into different circuits, and the best lighting was two circuits.

    If it is connected into a wire, it will be troublesome to overhaul it in the future, nonsense.

Related questions
1 answers2024-04-02

What lights to install, there are different lights, different wattages, now the most used are LED lights, the bathroom is normal 5-7 watts, if you need to be very bright, 12 watts, kitchen, 10-15 watts is good, if you need to be particularly bright, 15 to 20

1 answers2024-04-02

Empirically, I feel that 16 watts is too small, and the average ventilation fan is 40 to 60 watts, is there anything unique about it?

1 answers2024-04-02

Bathroom decoration needs to be preliminarily arranged according to the reserved water supply. If you need to change the location, you will also need to change the line, shifter, etc. Explain your specific situation and then explore it.

3 answers2024-04-02

4 square wires are completely sufficient, you put the live wire, neutral wire and grounding wire respectively on the ceiling, and then connect them one by one when installing.