-
Anonymous users2024-01-23The function of the overflow pipe is that when the water in the tank exceeds the predetermined amount of water, the excess water will flow directly from the overflow pipe to the toilet, so that the water will not overflow from the tank and flood the ground.
When the water in the tank begins to flow out of the overflow pipe, it means that when the water level reaches the predetermined water volume, the water inlet valve is still not closed, see if the screws of the buoy connecting rod to control the water inlet valve are loose, causing the buoy to not work, so tighten the screws.
It may also be that the water level of the connecting rod is adjusted too high, higher than the overflow pipe, and the valve is not closed, so the water continues to leak, as long as the water level of the connecting rod is lowered and then the screws are tightened.
-
Anonymous users2024-01-22It means that the toilet is unqualified, and a large amount of water can be used to complete the flushing process, and blocking the overflow pipe will cause the water seal depth to be insufficient.
The solution is to adjust the water level and height of the water inlet accessories downward, which may cause unqualified flushing after adjustment, please debug slowly.
-
Anonymous users2024-01-21Adjust the float so that the water level is lowered so that it doesn't leak. Blocking the overflow pipe will overflow the tank.
It should be that the gasket is broken, just go to the place where the toilet is sold and buy one and replace it.
This is the last time you pressed the water for too long, resulting in the plug not reset, you can press it again, just hear the snap sound to reset.
Dream interpretation : reminds you that there is a possibility of being cheated out of money, so be especially careful about lending money to acquaintances. >>>More
Before connecting, first determine the size of your own toilet drain (that is, the distance between the drain and the wall), but also determine whether the product, accessories, and instructions you buy are complete, and carefully read the instructions to understand some product matters. 1. The drain is required to be handled by the installer smoothly, and the bottom outlet of the toilet should be equipped with a special flange for the toilet, or the glass glue should be applied evenly with the drain, and the bottom and surrounding of the toilet should be glued, and the gap between the toilet and the wall should be even, placed properly and steadily. 2. After the toilet is in place, it is required that there is no leakage in the water intake, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is stable. >>>More
It is caused by the high level of the flush toilet and the low level of the tap water.