How do you need to maintain bathroom tiles?

The maintenance of tiles is the easiest, and you only need to wipe them with a damp cloth when cleaning, such as dirty bricks.

It needs to be cleaned with soapy water or detergent and then dried with a cloth, and the tiles will be cleaned immediately like a mirror.

Bathroom tiles do not need to be specially maintained, the wall can be waterproof before tiling, and daily cleaning can be done.

Clean up often. If you don't clean it for a long time, it is difficult to deal with the scale stains on the tiles, so you can use baking soda, alkaline water, hot water, and brushes to clean it.

If you don't do it for a long time, it's a little tiring to clean up.

Tile cleaner Some home decoration not long after, it was found that the bathroom tile has become a "flower face", after the stain seeped in, how to wipe can not be clean, a variety of bathroom tile cleaning methods have been used and have not seen any effect. Nowadays, there are products in the market that specialize in selling tile cleaners, which are also very helpful for cleaning bathroom tiles. And this bathroom tile cleaning method is also one of the most commonly used methods by people.

You can use toilet cleaner and grass wine on the tiles to make the tiles clean as new, and you will get some simple stains on the tiles in daily life, such as ordinary dust and dirt, which can be cleaned with soap and dish soap. Use soap to add some ammonia and turpentine mixture to make the tiles more shiny. Stick toilet paper or paper towels on the tiles, spray detergent on them and leave them for a while, just like a mask, not only will the detergent not drip everywhere, but the grease will all stick.

Just tear off the toilet paper and wipe it with a clean rag dipped in water 1 or 2 times, and the tiles will look brand new. As for the tile with heavy oil stains, the mop can be wiped, and for more convenience, a clean mop can also be used for bathroom tile cleaning. In fact, when buying and choosing tiles, professional brand tiles are often equipped with special cleaners, if you want to use a mop to wipe, first of all, you have to determine whether the mop has wiped the waxed floor, if so, it must not be used for bathroom tile cleaning, because dirt or stains, once stained with wax, it will be difficult to remove, otherwise it will be treated with professional cleaners.

Therefore, this bathroom tile cleaning method must also be paid attention to! Detergent, if the bathroom has stains, either rust, scale, or soap stains, black scale, for this kind of bathroom tile cleaning method, you can use a special stain removal paste, this kind of product may not have been heard of.

The maintenance method of bathroom tiles is as follows:

First, ceramic tile anti-seepage and mildew prevention measures. The walls of the bathroom are mostly tiled, and in order to keep them clean and shiny, they can be cleaned with a multi-purpose stain remover. As for the gaps in the tiles, you can first use a toothbrush dipped in a little detergent to remove the scale, and then use a brush brush to brush a waterproof agent in the gaps.

This prevents not only seepage, but also mold growth.

Two: Clever way to wipe the glass. Smooth mirrors and windows can be blurred due to long-term contact with water.

You can use a spray glass cleaner to spray a large X-shape on a whole piece of glass, then fold the wrung out rag, wipe it in one direction, and wait until the glass is dry, and then wipe it again with a dry cloth. It can also be wiped with old newspapers, and the ink of the paper can make the glass shine as bright as ever, and it can also wipe away stubborn dirt.

Three: Make a whitening mask for the toilet. Put an appropriate amount of water in the toilet first, clean it with a toilet brush, then pour in about 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it, if the dirt is heavier, you can pour a little detergent to soak it and then scrub it until it is clean, and then rinse it with clean water.

Four: the ceramic is as bright as new. Another convenient and eco-friendly way to clean your fixtures is with white vinegar and lemon peel.

Scrub the dirt on the surface of the sanitary ware first, and then wipe the surface of the sanitary ware with a soft cloth dipped in a little white vinegar or wipe it with lemon peel.

Hope it helps you and I wish you all the best to your friends.

One: Wipe with a dry cloth.

For general stains, wiping them with a rag is much cleaner than wiping them with a damp cloth. Wet cloth wiping will leave some stains on some tiles, but if you wipe them with a dry cloth, they will get brighter and brighter. For stains such as ink, beer, coffee, etc., you may wish to wash them with laundry detergent, dish soap, and then wipe them with a dry cloth.

Two: Wipe with stain remover.

In order to keep the bathroom tiles clean and bright, you can use multi-functional stain remover to clean during maintenance. As for the gaps in the tiles, you can first use a toothbrush dipped in a little detergent to remove the scale, and then use a brush to brush a waterproof agent in the gaps. This prevents not only seepage, but also mold growth.

The bathroom tiles do not need to be specially maintained, as long as they are wiped once a week with a damp rag, (cleaned once), and they will last for a long time.

Bathroom tile maintenance is to wipe it every day, and wipe it clean when there is steam.

Most people's practice is not to maintain it, use it at will, and when it is damaged, you can run down and replace it with a new one.

Don't eat too much and crush the floor tiles hahaha.

The floor of the bathroom is prone to water accumulation and is damp all year round. Stagnant water enters the inside of the tile, coupled with dampness and is not easy to dry, it leads to mold inside the tile, first breeding bacteria, and slowly the whole bathroom will waft with a musty smell.

If you want to be waterproof, you have to start at the source - find a way to keep water from getting inside the tile. There are two ways to do this:

1.Choose glazed tiles + beautiful seams.

The glaze is absolutely waterproof, but water can reach the sides of the tiles through the gaps in the tiles – the sides of the glazed tiles are not waterproof. At this time, use a sewing agent to block the gap, and Lu Yu can solve the problem.

2.Choose low-absorbency tiles.

In order to be more secure, you can also start with the tiles themselves - choose tiles with a lower water absorption rate. The water absorption rate describes the water absorption capacity of the tile embryo body (that is, the part without glaze), the water absorption rate is low, even if there is water into the tile gap, there is no need to worry about the tile will absorb water, and the moisture will return to roll.

After the bathroom tile is washed, it is necessary to clean up in time, timely moisture-proof treatment, collect water, ventilate more, and clean regularly. This prevents not only seepage, but also mold growth. I bought Thompson ceramics, maintenance and hygiene pay more attention, more than 10 years, the bathroom is still new.

Well, I think you need to pay attention to its cleanliness as well. Frequent ventilation.

Bathroom tiles need to be scrubbed frequently.

For added convenience, you can also use a clean mop for bathroom tile cleaning. In fact, when buying and choosing tiles, professional brand tiles are often equipped with special cleaners, if you want to use a mop to wipe, first of all, you have to determine whether the mop has wiped the waxed floor, if so, it must not be used for bathroom tile cleaning, because dirt or stains, once stained with wax, it will be difficult to remove, otherwise it will be treated with professional cleaners. Therefore, this bathroom tile cleaning method must also be paid attention to!

First, ceramic tile anti-seepage and mildew prevention measures. The walls of the bathroom are mostly tiled, and in order to keep them clean and shiny, they can be cleaned with a multi-purpose stain remover.

As for the gaps in the tiles, you can first use a toothbrush dipped in a little detergent to remove the scale, and then use a brush brush to brush a waterproof agent in the gaps. This prevents not only seepage, but also mold growth.

Two: Clever way to wipe the glass. Smooth mirrors and windows can be blurred due to long-term contact with water.

You can use a spray glass cleaner to spray a large X-shape on a whole piece of glass, then fold the wrung out rag, wipe it in one direction, and wait until the glass is dry, and then wipe it again with a dry cloth. It can also be wiped with old newspapers, and the ink of the paper can make the glass shine as bright as ever, and it can also wipe away stubborn dirt.

Three: Make a whitening mask for the toilet. Put an appropriate amount of water in the toilet first, clean it with a toilet brush, then pour in about 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it, if the dirt is heavier, you can pour a little detergent to soak it and then scrub it until it is clean, and then rinse it with clean water.

Four: the ceramic is as bright as new. Another convenient and eco-friendly way to clean your fixtures is with white vinegar and lemon peel.

Scrub the dirt on the surface of the sanitary ware first, and then wipe the surface of the sanitary ware with a soft cloth dipped in a little white vinegar or wipe it with lemon peel.

The tiles in the bathroom do not need to be maintained, and they can be cleaned with tile cleaner if they are dirty.

Bathroom tiles do not need special maintenance, just pay attention to hygiene.

If you want to maintain the tiles in the bathroom, you can clean them in time.

Maintenance is to prevent smashing, otherwise the tiles are very easy to break.

Now the tiles are porcelain tiles, do not need to be maintained, usually pay attention not to scratch the tiles with sharp objects, keep the tiles clean and hygienic. In other words, the stains on the tiles can be wiped clean, and there is no need for maintenance.