-
Anonymous users2024-01-231. Fixing method of glass ceiling.
Method 1: Adhesive method.
The top surface is primed with a keel, and then the keel is sealed with a joint layer, and the commonly used nine-centimeter blockboard is then glued to the glass after leveling.
Method 2: Modeling strip method.
Put the glass on it after modeling with blockboard, and you can also use wooden lines to make a strip to fix the glass, or you can fix it with stainless steel pressure plate.
Method 3: Fix with nails.
The nail is installed and fixed, and the glass ceiling is installed and fixed on the bottom plate with advertising nails.
2. Precautions for installation of glass ceilings.
1) The base plate needs to be laid before installation.
Glass ceilings have one thing in common is that they have to lay a bottom plate, which is generally 9 centimeters blockboard and plywood.
2) Do a good job of anti-corrosion and fire prevention.
All exposed welds must be painted with anti-rust paint before installing the glass panel. The contact surface between the wooden skeleton and the structure should be treated with anti-corrosion, and the keel does not need to be viscose, and it needs to be brushed with fireproof coating 2 3 degrees.
It is better to install a ceiling horn with a back cover, or make a cabinet out of wood for those without a back cover. If you don't have to force ceiling installation, a wall-mounted speaker will be a better choice.
1. The installation of the internal integrated ceiling lamp must be selected in a good position; There is good ventilation and lighting environment, and the condition of the wall itself should be checked to prevent the wall peeling phenomenon during the installation process. The ceiling is a must be inspected before installation, and these are the best operating platforms that can be used during construction and installation. Jiuzheng Home Network believes that light steel skeletons are generally used to make a protective measure in the ceiling. >>>More
The method is as follows: 1. The ceiling keel must be firm and flat. Adjust the camber with boom or rib bolts. >>>More
In modern residential buildings, some floors are relatively low in height. Therefore, residents will also be more depressed. But if you put a mirror on the ceiling, then it will have a good effect of stretching the space. >>>More
It is necessary to have a sufficiently safe stand-alone rigging system (boom or keel) that is detached from the ceiling structure.