-
Anonymous users2024-01-23It is best to place the switch of the mirror front light in the bathroom. The bath bomb light is outside.
-
Anonymous users2024-01-22The bathroom is a humid environment, washing; Toilet; Washing of small pieces of clothing and socks; Bathing....Activities are inseparable from water, so all electrical switches should be placed outside the bathroom, if necessary in the bathroom.
If there is a socket, it should also be moisture-proof.
It's important to pay attention to this common sense.
The lighting is controlled by the door switch, the line is in the appropriate position on the top, and then from the top light lead to the mirror (generally meter high), the mirror front lamp is controlled by the nearest switch or the same top light switch. It should also be heated and exhaust equipment, not as simple as two wires. Again.
Ceiling lights still need to be installed on the top surface of the bathroom, and the mirror front lamp is installed on the wall, and the scope of lighting will be limited (limited), and the lighting on the bath bomb is only possible to use when taking a bath. Hope to adopt.
According to the normal practice, the red line is the live wire, one end of the three switches, and the green line is the neutral wire, wrapped with insulating tape, and used to add a socket later.
The lights don't affect anything. Unless it's the kind of sharp light that is not good for the bed. If there is a beam on the bed, the beam is pressed on the top, and the ceiling is covered. Or it doesn't matter if the bed doesn't sit under the beam.
The bath bomb line is available in 5 colors: red, green, yellow, blue, and black. Use black and red to make the light wire. Blue and green do the ventilation fan line. If it is not enough, it will be extended and wrapped separately with insulating glue. In the switch, wrap the black and green wires tightly together with the neutral wire of the power supply. I connect the live wire of the power supply to the switch. >>>More