What are the appearance quality requirements of solid wood flooring?

First of all, the size of the kanban surface should be consistent, there can be no size head, tongue and groove male groove, female groove should also be consistent in size, male groove, female groove try to spell, to be tight, the joint between the board and the board should be very tight, the head and tail are consistent, down is the Kanban surface paint to be full, the paint surface can not have small bubbles, the gloss is uniform, from the paint production process is divided into rolling paint and spraying paint, or first rolling paint and then spraying paint, the advantage of rolling paint is good adhesion, showing a matte effect, the advantage of spraying paint is that it can do a very bright effect, thief bright thief bright.

It is to see whether there is any sealing paint on the bottom plate and the surrounding tongue and groove, which is conducive to the solid wood floor is not easy to absorb moisture and remains stable for a long time.

The most critical and most common consumer is most likely to be negligent, is to look at the moisture content of the floor, this needs to have a moisture content measuring instrument, the moisture content is very critical, especially in the north to be particularly careful, must choose the water content below 12%, otherwise the floor to the winter heating season, because the air dry solid wood floor is very easy to shrink and pull joints, and even the board surface cracks, the south can choose the moisture content of about 15 degrees. Pay attention to unscrupulous profiteers who take boards with moisture content in the south to sell them in the north, because the boards with moisture content in the south will be slightly cheaper because they don't need to be dried twice.