How thick are the water supply pipes for a row of 15 toilets in the hospital

Updated on Bathroom 2024-04-01
1 answers
  1. Anonymous users2024-01-23

    How thick are the water supply pipes for a row of 15 toilets in the hospitalThe horizontal sewage pipe should be at least 20 cm large PVC pipe.

    Among them, the horizontal slope must be reached to ensure smoothness and no blockage.

Related questions
2 answers2024-04-01

The distance between the toilet sewer pipe and the Rose Pavilion is 330 350 from the wall, so that the distance between the center of the toilet drain and the outside of the toilet can be about 420 430, and at least 400. Nowadays, no matter what kind of toilet, the bend and gas have been formed into a whole, so the ground drain should be more than 600 meters from the wall, which is very good for the toilet.

5 answers2024-04-01

The infill wall of the frame structure building is also not allowed to open transverse grooves, because the wall itself also has the problem of self-weight and horizontal load, and the wall is very thin, 200 mm, with extremely low stiffness, and must not be weakened. The wall is very long in the length direction, for example, 4-5 meters, and the stiffness in this direction is very large, so the vertical groove has little effect.

1 answers2024-04-01

The positioning of the toilet water supply pipe is measured by the original ground of the bathroom, yes.

1 answers2024-04-01

The water supply pipe in the bathroom is H+ at the washbasin, H+ at the toilet urinal, and H+ at the sewage pool. Sewage pipes or both. >>>More