-
Anonymous users2024-01-23Anti-theft door lock unlocking priceIf it's just unlocking, it's generally about 50-60 yuan.
If you need to change the lock cylinder (package lock cylinder) after unlocking, the general charge is 100-110 yuan; If you need to change the lock (package lock) after unlocking, it is generally 130-140 yuan.
If you bring your own lock or lock cylinder after unlocking, add a replacement fee of 15-20 yuan.
To dismantle the anti-theft door lock, it can generally only be removed indoors, and it cannot be removed outside the door, only destruction. Because the door lock is screwed in the room)
First of all, remove the panel, remove 2 lock nails on the inner panel of the door lock, remove the upper and lower screws of the inner side panel, remove the inner handle panel, and then remove the lock cap and the outer handle, there is a screw in the middle of the stall of the lock body on the door side, between the deadbolts, take out this lock cylinder, and the lock cylinder can be taken out.
Answer: It is recommended to remove the panel, remove 2 lock nails on the inner panel of the door lock, remove the upper and lower screws of the inner side panel, remove the inner handle panel, and then remove the lock cap and the outer handle, there is a screw in the middle of the stall of the lock body on the door side, between the deadbolts, take out this lock cylinder, and the lock cylinder can be taken out.
You will observe the spherical lock, the front of the keyhole is outside the door, the other end is the door, the end of the door near the back cover where there is a small hole, there is a protrusion inside, you take a small screwdriver to push the protrusion inward, and at the same time the spherical object back back, you can remove the back ball, and then reverse twist the back cover, and remove it, and then you take a Phillips screwdriver to unscrew the round spacer, so that you will just open the spherical trivial disassembly! Now you can start to install the lock: you put the tongue of the lock (that is, the cylindrical object on the top of the box on it, and there is a square iron sheet with two holes on the top of it) into the hole on the side of the door, and then take the ball in front of it in your hand, and put the other end in the hole outside the door and stuff it into the room, and at the same time make the gap in the lock body align with the fork behind the lock tongue, and then buckle the round gasket after stuffing it into place, and tighten the screws, then screw the back cover, and finally, align the back ball with the lock and push it on. When pushing up, you should also turn it slightly clockwise, and remember that there is also a small gap in the back ball, and you should aim it in the direction of the small hole with a protrusion! >>>More
Different brands, different prices. Generally around 100.
1. Remove the panel, and remove 2 locking nails on the inner panel of the door lock. Note: When removing the last screw, do not let the outside fall to the ground, so as not to damage the dust. >>>More