What to do if there is often a peculiar smell in the bathroom

Find out the source of the smell in the bathroom, mainly floor drains, toilets, sink drains, and ventilation fans (whether there are windows or not).

The first check the toilet, the current toilet is generally sealed with glass glue, you can get close to smell it, if there is a smell (the kind of sour smell discharged from the sewer, very special, and not easy to confuse), you can use glass glue to make a circle under the line, seal it, and then look at the water seal of the toilet, if there is still a smell, it means that the water seal of the toilet is destroyed, and then you have to change the toilet.

Floor drain: Be sure to install an anti-odor floor drain, ask closely, if there is a continuous odor, then the floor drain is not odor-proof, just replace it with a new one, buy a core online is easy to replace, if there is no smell can be eliminated, there is no floor drain at home to plug it with sandbags.

Sink: Under normal circumstances, the water pipe installed by the developer has a water seal (that is, an upward bend, which can retain a part of the water to isolate the smell of the sewer), but it is not necessarily, so you should pay attention to it at this time. Generally, when the master installs the sink, he defaults to the water seal in the sewer pipe of your house, so that he will directly extend the sewer into the pipe.

If there is a persistent sour smell in the bathroom at this time, it is likely that there is no water seal, if you smell a continuous smell in the sink, it is easy to solve, bend the pipe that stretches into the sewer pipe below, and then seal the bottom, and the problem is solved immediately.

Exhaust fan and air duct: Generally, when the developer delivers the house, a check valve will be installed at the mouth of the air duct, that is, a one-way valve, and the gas can only flow from the bathroom to the pipe, not backflow.

Precautions: If you have a window, you should often open the window for ventilation, turn on the ventilation fan at the same time, and put some air freshener to ensure that your bathroom does not have any odor.

1.Toilet surface.

When cleaning the toilet, first put an appropriate amount of water in it, first brush it with the toilet, then pour in about 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it, if the toilet bowl is dirty and the dirt is serious, you can soak it with detergent for a short period of time and then brush it until it is clean, and finally rinse it with clean water again.

Article picture 32Toilet gaps.

The cracks in the toilet bowl are the most difficult places to clean, and the dirt in them contains a lot of harmful bacteria, and if you only use ordinary detergents, you can't completely remove the dirt inside. In order to protect the quality of the toilet, we generally use alkaline cleaners, but when cleaning cracks, we also need to use acidic cleaners to strengthen the treatment.

Article picture 43Air.

Many people like to put some solid air cleaners in the bathroom, and now there are many varieties of air fresheners in large supermarkets, which are very popular with people. But does anyone know some household common sense, such as the easiest way to purify the air in the bathroom is to put a cup of balsamic vinegar or a box of open cool oil in the bathroom, and the odor will disappear naturally, the effect is not inferior to air cleaners, and it is safe and harmless.

Article picture 54Tap.

I don't know if you have noticed, the faucet has been used for a long time, and there will be some dirt in the water outlet, wrap the faucet first when cleaning the faucet, and then soak it with vinegar. The second step is to use a lemon brush to clean the faucet, and finally rinse it with clean water and wipe it clean with a rag.

Article picture 65Exhaust fan.

Although the exhaust fan does not need to be cleaned frequently, it will also hide dirt after being used for a long time, so the exhaust fan should also be cleaned regularly. Remove the fan cover, soak it in soapy water, wipe it with a rag, and then reinstall it after drying.

How do I get rid of odors in the bathroom?

Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing).

For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).

Exterior wall paint can be made waterproof with transparent waterproof repair adhesive.

The product will penetrate into the base layer and make the base layer waterproof. The product is recommended to be constructed in a dry place, the drier the base surface, the deeper the product can penetrate, if the base surface is full of moisture, high density, the material can not penetrate well. Regarding the principle of waterproof plugging, the source of water leakage is not blocked, and the water will only continue to penetrate into the wall, which will exist inside the wall for a long time, and will leak out from other parts of the wall when the water reaches a certain level.

The problem cannot be solved, and only by spraying waterproofing agent on the outside of the roof or exterior wall so that the water cannot penetrate into the wall and flow away can the problem be completely solved.

How to get rid of odors in the bathroom: 3 steps.