What does the small arrow on the balcony on the floor plan represent?

Updated on Balcony 2024-04-22
2 answers
  1. Anonymous users2024-01-23

    Drain direction, arrow pointing to floor drain. Tell the construction crew to look for the slope.

  2. Anonymous users2024-01-22

    It seems to find a slope to prevent rainwater from flowing into nowhere to discharge, and a rainwater pipe should be set up at the corner of the wall. However, some of the drawings of the rainwater pipes are drawn on the architectural drawings, and some are drawn on the equipment drawings.

Related questions
What contours can be seen in the floor plan of 1 100. The convex lines of the balcony are:
2 answers2024-04-22

In the 1:100 building plan, the actual length of 1 meter is only 1 cm in the drawing, and some of the outlines that are actually only a few centimeters thick are less than 1 mm in the drawing, which cannot be clearly represented in 1:100. >>>More

In the Tianzheng building, how to draw a railing on the balcony of the building plan
3 answers2024-04-22

In fact, there is no need to use Tianzheng, it is OK to represent the direct line, if you must use Tianzheng to draw the railing of the floor plan, you can use Tianzheng [Staircase Other] menu to draw the balcony, after the balcony is drawn, the plane shows two parallel lines, in fact, it is the railing projection, you use the 3DO command to view, color vision style, concept, and find that it has been painted with the railing.

How to look at the balcony guardrail on the floor plan
2 answers2024-04-22

This one is invisible.

The so-called floor plan is to mark the size and relative position size of each functional area. On this, you can only see the dimensions and location dimensions of the room (bedroom, living room, hallway, kitchen, bathroom, balcony), but you can't see the details. >>>More

What line is used to draw the balcony of the building in the floor plan, whether it is thick, medium
2 answers2024-04-22

Thin lines, thick lines represent the sections that have been cut.

In the general plan of the building, must the balcony part be drawn outside the outer contour line?
1 answers2024-04-22

The main floor plan of the main building also uses a maximum scale of 1 500 or more, i.e. a balcony of 1 metre, which is only 2 mm on the drawing. When a large range of 1 2000 is used, it simply does not behave.