-
Anonymous users2024-01-23Step 1: Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark.
In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid. If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.
Step 2: When replacing the toilet seat, simply remove the fixing bolt on the back of the toilet bowl to replace it; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing.
However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.
-
Anonymous users2024-01-22There are two fixing nuts under the toilet lid fixing, loosen the nuts counterclockwise and remove them. If you install it, follow the reverse operation above.
-
Anonymous users2024-01-21Some toilets have nuts in the back. Some toilet seats can be pressed down there. Look at yours of the kind.
Buying tip 1: Know the price of the product.
Before buying a smart toilet seat, you must first have a general understanding of the price point of the product. >>>More
1. You can disassemble it by screwing it directly, the bottom end of the toilet lid is connected to the toilet, and the back is screwed up, you only need to reach down to find the screws on both sides to unscrew the whole cover to take it down, and the operation is also very simple. 2. If it is some smart toilets, there will be a button on the toilet lid, and the installation limit piece can be dialed out after pressing, and the entire toilet lid can be removed, so you need to understand the style.
Method 1 to change the toilet seat: find the screw cap, remove it with a live hand, and then replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. >>>More
There is a screw cap under the hinge of the toilet seat, and you can remove the old one by turning it to the left, and then install the new one in the same way.
1. When replacing the toilet cover, you only need to remove the fixing bolt at the back of the toilet to replace it, and you can operate it in the opposite direction during installation. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. But you also need to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace! >>>More