-
Anonymous users2024-01-231.The main water pipe before entering the room has a main gate, close it before installation, and open it after installation to have water.
2.The end of the pipe should be sealed with a plug, unscrewed in the counterclockwise direction with a wrench, and the outer tooth part of the new faucet should be wrapped in a clockwise direction with several circles of water adhesive tape before installing the water pipe.
3.Your outlet still needs to be lengthened with a short straight pipe, otherwise the water will overflow and cannot be discharged.
-
Anonymous users2024-01-22You can just use a tool that can be unscrewed, but don't forget, before you screw it, close the sluice, first of all, you have to know where the valve is, and if you don't put it on, there will be water.
Now many modern families are considering the installation design of the whole cabinet, so we naturally need to be able to consider the height of the kitchen sink faucet when considering the height of the cabinet, generally speaking, the height of the kitchen sink is parallel to the cabinet, but the kitchen faucet is about 20 cm to 30 cm higher than the parallel height of the cabinet. >>>More
Here's how to install it:
1. The principle of hot and cold water faucet. >>>More
In kitchen decoration, the sink is the most important accessory. Because the sink is the most frequently used. The following is a summary of the points to note about the purchase of sinks. >>>More
Instantaneous electric water faucets in old houses are more affordable and simpler; >>>More
1. Water leakage at the water outlet: The kitchen faucet leaks, and the water leakage at the water outlet is caused by the wear of the shaft gasket in the faucet. Solution to a leak at the outlet: >>>More