-
Anonymous users2024-01-23If the house has not been renovated, directly through the wall to lay pipes, and insulate the PE casing on the bread outside the section of the pipe leading the bathroom from the outlet of the gas water heater;
If the house has already been renovated, consider making holes in the wall in a convenient location to directly penetrate the pipes.
The shorter the length of the connecting water pipe from the hot water outlet of the water heater to the location where the hot water is used in the bathroom, the better.
1. There may be a problem with the hose of the hot water pipe. Directly remove the hose of the water heater and turn on the water heater, if it works normally, continue to overhaul the pipes other than the hose, if the hot water still cannot be produced, overhaul the pipes inside the hose. >>>More
This will not waste you any gas, if you are the kitchen and bathroom are hot and cold water pipes, connected to the balcony hot water pipes, the balcony hot water pipes are not used for a long time, and it is only the branch water of this section is cold. (The hot water of this water heater is where you use the hot water pipe, and where the hot water flows, but there will be a section of cold water in the water pipe, and there will be hot water when this water is discharged.) ）
It does not need to be turned off, it is automatically controlled, but for the sake of safety and to prevent gas leakage in the natural gas pipeline, it is not harmful to turn off the valve if it is convenient.
If there is space for installation, try not to install it in a place with dense pipes, in foreign countries, gas water heaters are generally installed outdoors, and more are installed in the kitchen in China, and the service life of gas water heaters is generally about 6-8 years.
If the pressure is sufficient, the pressure of the water heater is mainly the pressure of the inlet pipe, and it is not a big problem which way to go. If the water outlet pressure is small, a booster pump can be installed.