-
Anonymous users2024-01-231. First of all, open the water tank of the toilet, and let's see what level the scoop inside the water tank is at when it is full of water. If the water inside is full and the tank is still flooding, then there must be a leak coming out.
2. Use water to pull the card position of the water scoop up and down to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed. Remember to press the ladle down a little bit, not too high.
3. You can remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water in the water tank directly, and try it with dish soap and washing powder. If you can do this, you can continue to use it, if not, you need to replace it.
4. Check the interface of the stainless steel hose at the position of the water tank outside the water tank to see if it is not tightened or the rubber pad inside is aging and causing water leakage. This must be ascertained.
5. If the internal equipment is fine, then it is also necessary to check whether the water tank of the toilet has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.
Do you live on the first floor? Or is your toilet a converted from the original squat pit? If such a toilet does not have a punch, there is nothing to be done.
The common reason for the leakage of the flush toilet is that the hemispherical rubber cover that covers the drain is lighter, and the water leaks due to insufficient gravity after the water tank is discharged, and it is not tight enough when it falls, and it often needs to be repeated to cover it tightly. The way to deal with it is to bundle a little heavy object on the connecting rod connecting the rubber cover, such as a large nut, toothpaste skin, etc., pay attention to the bundle as close as possible to the rubber cover, so that the rubber cover is easy to cover the drain and the leakage problem will be dealt with.
The redness of the automatic toilet seat may be, well, your clothes or pants are red when you go to the toilet.
You need to make it clear whether it is a leak at the inlet or outlet. If it is a leak at the water inlet, just replace the water inlet pipe, generally the rubber pad is aging, and just changing the gasket can also solve the problem. If it is a leak at the outlet, it means that there is water flowing down the drain from the toilet all the time, then it is that the drain valve in the toilet tank is broken or the rubber mat is stuck with debris. >>>More
The trick to quickly unclog the toilet bowl is very practical.