What is the height of the two bulging screws behind the water outlet on the toilet wall?

Updated on Toilet 2024-04-22
1 answers
  1. Anonymous users2024-01-23

    It should be determined according to the specific positioning size of the toilet.

    And not only to determine the height of the two expansion bolts, but also to determine the absolute position of the expansion bolts, the distance between the two bolts and other pipe fitting size data.

    It is recommended to measure it according to the actual placement of the toilet, or to ask the toilet seller for the relevant dimensioning diagram.

Related questions
Thank you for whether the two plastic screws of the toilet seat should be tightened.
1 answers2024-04-22

Yes, what do you want?

The water pipe behind the toilet is broken, how to replace it near the wall
2 answers2024-04-22

Professionals,

You have your own way. >>>More

The front two ceilings are more suitable for the background wall at the back. Everyone, give me a su
1 answers2024-04-22

This should be Chinese.

After all, it needs to be matched. >>>More

What happens to the leaking water in the two small holes in the back of the toilet when flushing
2 answers2024-04-22

Generally, toilets with these two small holes are siphon-type. In order to increase the siphon force. If there is frequent water leakage, it should be caused by the wear of the rubber ring at the bottom of the water tank or the misalignment of the rubber pad, the sealing is not real, or the float valve is too high.

What's going on with the leaking two holes in the back of the toilet
3 answers2024-04-22

With the improvement of people's living standards, toilets have been installed in every household. But the toilet is also a consumable, and it can be problematic after a period of use. So recently, some readers reported that their horse mess bucket seems to be leaking, and there are two holes in the back that have been leaking. >>>More