Recently, I heard that solid wood furniture is better, but how to identify whether it is solid wood

If it is all solid wood, it is very expensive.

The so-called "solid wood" furniture sold on the market today is partly solid wood and partly is. Or. done.

Regarding solid wood furniture, it is generally used.

to keep. textures and colors; Some.

can be colored; The solid wood is relatively thick and heavy, the lacquer surface is smooth and soft, and the feel is good;

Iron. It is also a kind of solid wood, cheap, it is soft, and it is easy to crack when the weather is dry, and many manufacturers will use it to enrich the wood.

Veneer furniture is certainly not solid wood.

The easiest way to identify: use your fingernails or keys to scratch the back of the furniture, if there are scratches, it means that the quality is not too good.

Solid wood is lighter than others, usually it is veneered, basically solid wood is log color, there is no special way to identify.

Smack with a hammer and you'll know, be sure to smash it hard.

There are dark and light colors.

Scars are a good helper.

There is a natural color difference in all solid wood furniture, and there are certain differences in color and texture, and there are few defects in the appearance of solid wood veneer furniture, and its texture is clear and even better than that of all solid wood furniture. Consumers can use the texture and scar knots of solid wood to see the corresponding position on the exterior and back respectively, and if the correspondence is good, it is pure solid wood. In addition, looking at the scar is also a good way to identify pure wood, look at the location of one side of the scar, and then find out if there is a corresponding texture on the other side.

Cross-sectional view of timber.

For the identification of furniture with a combination of board and wood, in short, it is generally a man-made board in a large area such as wardrobe frames, shelves, drawer inner panels, etc. If the manufacturer pastes solid wood veneer on the outside of the wood-based panel, although the smooth surface improves the durability, the cross-section of the board will find that the grain of the two sides intersects, which is not in line with the normal growth direction of the tree, which is the main way to identify.

Do not let go of the subtle nail holes.

Some frames are made of solid wood, and the side panels, shelves, etc., are made of particleboard or MDF veneer, and the center of the board is actually plywood or various waste wood. This kind of furniture is difficult to identify by looking at the sample, but when it is installed after entering the site, it can be seen by the position of the nail hole, if it is particleboard, there are sawdust, and MDF is pulp-like, and consumers can use this feature to identify.

The hand touches the nose and smells almost away.

Consumers can tap the wood surface with their hands a few times, and the solid wood material will produce a crisper sound, while the wood-based panel will have a low sound. In addition, solid wood veneer feels very textured, while general artificial paper veneer feels dry.

The most common but very effective way to do this is to smell the furniture up close. Most solid wood has the aroma of tree species, pine has a pine resin smell, cypress has a light fragrance, camphor wood has a clear camphor wood smell, but fiberboard and MDF will have a strong pungent smell, especially in the cabinet door or drawer, the smell is easier to distinguish. Using this convenient method of identification, I believe that the solid wood furniture that I judge must be the same.

The most commonly used effective way to know is to smell the smell of furniture up close, most solid wood furniture has the aroma of a tree species, pine has a pine resin smell, cypress has a light smell, camphor wood has a camphor wood smell and so on. There is a natural color difference in solid wood furniture, and there are certain differences in its color and texture. Consumers can use the texture and scars of solid wood to judge its quality and inferiority.

(See, smell, listen,) first look at the lines and knots of the main body of solid wood furniture, and the tree pattern on the front and the back will correspond. Each solid wood log has a unique smell of its own, and even when you open the doors or drawers of the cabinet, even if it is processed into furniture, it will leave a smell. Solid wood furniture will have a crisp sound when tapped.

The most important point is to look at the texture of the wood, the focus is on whether the texture of the junction of the different sides of the furniture wood can be matched.

Some businesses use solid wood on the outside, pay attention to the back panel, the sliding board, the side panel, and the drawer board.

In fact, in order to reduce costs, many furniture frames are made of solid wood, and the surface is made of particleboard (lower cost), MDF, large heart board, and multi-layer board pasted with solid wood veneer. Some also have finger-jointed solid wood veneer pasted on the back of the wardrobe door, and it is a natural wood color, which is often misleading to consumers. Low-cost surface structures also include sticker oil injection and melamine board, both of which are observable for front and side stitching.

How to tell that it is all solid wood furniture? 1.First of all, look at whether there is wood grain on the surface of the furniture, and if there is no wood grain, the MDF is directly painted.

2.Secondly, it depends on whether it is a whole veneer, if it is a whole sheet, it is very likely to be veneered. We know that most of the trees in nature are within meters in diameter, so the boards need to be spliced or finger-jointed.

If the surface of a large area is a single piece of wood, the cost is very high, and the retail price of the store is even higher. 3.The front of the wardrobe door is spliced, while the back is finger jointed, and both sides of MDF and other boards are veneered.

4.The front and back of the wardrobe door (the back is often colored with wood) are finger jointed, spliced, or there are scars, then it depends on whether the corresponding parts of the front and back sides correspond one by one, if it is dislocated distribution, it means that the two sides of the MDF and other boards are pasted with veneer. 5.

The side of the wardrobe door can be observed. If the wood grain on the side of the furniture (that is, the side we usually call the thickness side) is distributed in a straight line, then the veneer is attached to the MDF and other boards, because the growth rings are circled and cut into irregular curves. 6.

You can also judge by looking at the handle, screw holes and other parts to see if there is a sandwich and MDF. 7.If you want to buy good furniture, it doesn't matter if it's all solid wood (because of the cost), what matters is whether the adhesive and paint are environmentally friendly, especially the paint.

Paint is divided into two types: oily paint and water-based, oil-based paint is blended with Tianna water, and water-based paint is blended with tap water, and it is obvious that water-based paint is more environmentally friendly. After the construction of water-based paint, there is almost no odor, containing trace amounts of formaldehyde and benzene, which is far lower than the national safety standard.

Wood species are not the same, identification methods are not the same, at present, many manufacturers are the miscellaneous wood, MDF and other (miscellaneous wood - more poor wood species) veneer to make ash, mahogany and other more common furniture in the market.

Identification method: look at the texture of the furniture - whether there are knots Most of the knots are solid wood (do not exclude high-end furniture selected knotless wood). Whether there are fine lines on the backlit surface of the furniture There is no solid wood furniture (almost these two points can distinguish the quality of solid wood).