Can the aluminum alloy door of the bathroom be replaced?

OK. There are two types of bathroom doors according to the installation method: outerwear, the door frame (door frame line) is on the outside of the wall; Inpackaged, the door frame (door frame line) is on the inner side of the wall; 'Wall' refers to a wall with a bathroom door opening (usually a wall).

In-packing: You can paste the bricks first, and the door frame lines can partially cover the problem of uneven tile repair due to the door opening.

Outsourcing: 1. You can paste the brick first: according to the size of the door opening after pasting the brick, leave a certain gap between the left and right up and down (otherwise it is not good to put it in, and you can play glass glue when fixing), if you want to set the door first (there is a time difference in the door), you need to master the size of the door opening when paving, and you can only be large and not small.

2. The wall of the door opening is not pasted, and the others can be pasted: wait until other large areas are pasted, and then install the door, and then complete the rest.

No matter what the method, installing the door first and then putting the bricks will be inconvenient (such as opening and closing the door for construction and finished product protection).

The bathroom door referred to above is a finished door (customized by the manufacturer).

If it is a non-finished door (generally without frame lines), you can first press the frame and then pave and then install the door, but for the outsourcing type, pay attention to increase the height of the door opening, otherwise the door will not be installed at that time, because the door is disassembled and assembled in the vertical direction (pay attention to the installation method of the hinge position).

The bathroom is a relatively humid environment, so the material of the bathroom door is very important, both moisture-proof and anti-corrosion. The following is an introduction to the problems that should be paid attention to in the selection of bathroom doors.

1. The wooden door cannot see water, and is easy to be damp and deformed. The advantage of wooden doors is that the style is unified, and there are more styles and colors.

2. Aluminum alloy doors are also a very common type, with sky and earth slip and hanging slip. There are many options for slippery skies, and this form of door is suitable for installation on top of the wardrobe. If it is installed in the bathroom, the floor rail is easy to rust and is not easy to take care of.

3. In the selection of bathroom doors, aluminum alloy is still very common. The aluminum alloy door has good waterproof and moisture resistance; The disadvantage is that the sealing effect is not good, and the quality of aluminum alloy on the market is difficult to guarantee.

4. If the bathroom is a bright guard, and the design is dry and wet separation, you can choose a wooden door, and pay attention to it when you usually use it.

5. If the bathroom is a secret guard, it is recommended that you choose an aluminum alloy door. The bathroom has poor air permeability, the environment of the bathroom is very humid, and it is easy to deform if you use a wooden door. Over time, the wooden door will also become moldy.

6. The moisture of the bathroom is inevitable, if the space of the bathroom is large, it is possible to design the bath, and then choose a wooden door with waterproof and anti-corrosion. Solid wood is waterproof, but it is expensive.

To sum up: it is better to install aluminum alloy doors in the bathroom.