-
Anonymous users2024-01-23It should be that the drain port of the pressure relief valve of the water heater is dripping, which is normal.
When the water pressure in the water heater is too high during the water heating process, the pressure relief valve will discharge part of the water from the drain port, which is to ensure that the water pressure in the water heater tank is not too high and cause a major failure of the water heater tank.
If you don't want the water to drip directly onto the ground, you can connect a hose to the drain of the pressure relief valve to direct the water to the place where they want to discharge.
The distance between the kitchen and bathroom and the water heater is too far, the pipe is too long, and part of the nozzle is sealed when the raw material belt is wrapped in the joint, elbow, etc., resulting in poor water flow.
The exhaust fan can be installed on the wall or on the ceiling, and it does not take up much space, and the installation position can be moved, because the length of the exhaust pipe can be adjusted. It's usually okay to fit.
This is the sound of an air explosion, which occurs instantaneously when hot steam or water meets cold water.
Gas water heaters are not easy to use, and the water flow rate should be considered first. >>>More
It may be that there is a foreign object in the water pipe that is blocked. You can disassemble the valve in front of your own water meter and take a look.