-
Anonymous users2024-01-23In fact, you can find a half-inch-wide bamboo skewer in the toilet, which will do the trick.
Most of the time, the toilet flushes more often and it will pass, especially if it is a dissolvable or fragile item such as dirt or paper. If it's greasy, then turn it over with a basin of boiling water.
-
Anonymous users2024-01-22Find the bolt and pull it out to remove it, unless it's a locked deadbolt.
-
Anonymous users2024-01-21The upper gusset is knocked down, and a few screws inside can be unscrewed.
-
Anonymous users2024-01-20You can take a look at the instructions for this toilet and then remove it.
Disassembling the toilet seat is actually very simple, you only need to find the screw cap of the toilet seat, and then use a wrench to remove the screw cap and replace it with a new screw cap. However, the location of the toilet seat is somewhat difficult to find, some are in a conspicuous place, and some are in the dark.
Toilet seat dismantling diagram Look at the photos on the Internet to disassemble ah There are a lot of them It's not as difficult as you think You can search it on the Internet.
1 Find the screws, remove them with a handler, and replace them with new ones. Generally, the position of the screws is difficult to find, some can be seen, and some cannot be seen in the dark. The screw in the dark, usually on the side of the toilet bowl, opens the lid. >>>More
As of 2019, there are two types of toilet seats, ordinary toilet seats and smart toilet seats. The following takes an ordinary toilet seat as an example to introduce the method of removing the toilet seat, first prepare the material: a screwdriver. >>>More
Each lid is secured by two screw holes at the back, bolted underneath the toilet bowl – you need to reach for it and remove it!