-
Anonymous users2024-01-23One, turn the buoy ball in the tank down. You can adjust the float rod and see for yourself.
Second, to save water, there is another way, you don't have to adjust the water level, take a Coke bottle, fill it with water and put it in the water tank. This saves the volume of one bottle at a time.
-
Anonymous users2024-01-22It is said that in order to save water, Panasonic put a brick in each flush toilet so that it can save the volume of water in one brick every time it is flushed. The landlord can also take the advice of the first floor and put a coke bottle filled with water. This method is the easiest.
Lift the lid of the water tank and see a cross groove at the top of the inlet valve, and turn left with a cross driver in this groove to lower the water level.
This one, there is a rod with screws and nuts inside the water tank, the nut is adjustable, just adjust this nut, can adjust the water level. Just give it a try, it's not a big problem.
Although this is feasible but it is a waste of water, in fact, put a piece of paper on the water surface before use, it will have the same effect, you can try it
There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron and pulled the iron upwards to adjust the low, down is high, open the upper lid of the toilet, you can see the ball linkage mechanism inside. >>>More
The management of ponds mainly regulates the temperature through the depth of the pond water. From more than 10 days to the germination stage, the water depth is maintained at 40 cm, and then with the vigorous growth of the branches, the water depth gradually deepens to 120 cm, and the water depth is reduced to 50 cm again one month before harvest.