My house is on the first floor, during this time the bathroom floor drain always returned dirty thin

It may be due to a blockage of the main sewage pipe, which causes the sewage to flow back into the room, which usually occurs on the first floor.

In this case, go to the property to solve it, it's their job duty!

Anti-dirty things are the phenomenon that the main sewer pipe is blocked, find the property to deal with it, the toilet at home is blocked that is your own problem, find to dredge the sewer, the premise is to repair the main sewer first, otherwise when the toilet is not blocked, all the sewage upstairs in your house will come into your house along the pipe.

The water is blocked. This is usually the case on the first floor of a building. In winter, it may be that the outside sewer pipe is frozen, and in the summer, it is due to the blockage caused by too much sewage from the whole building.

The solution is to make a separate set of sewer directly into the sewage well outside the building, and then plug the original sewer of your own house, and then block it next time, so as to ensure that your home will not be backwater, and the backwater is also the second floor.

I've done three of the ones I've done, and they're usually slightly older buildings.

The proof is still blocked, and it must be thoroughly dredged otherwise it will be troublesome all the time, in fact, whether the floor drain or the toilet is finally drained through a pipe, the main pipe is blocked, and these two have to leak.

It's the public manure pipe in the whole building that is blocked. Find someone to fix it, or it's all in your bathroom. I can't live in the house on the first floor, I paid the tuition!!

The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why?

This is what my toilet base looks like after it is disassembled, it has been smelly for three years, so disgusting.

> let's talk about the four main reasons why the toilet stinks:

1. The quality of the toilet product itself is poor, and the void of the toilet is large, and there are a lot of stains left in it.

2. The project was not done well during installation, and the flange ring under the toilet was not sealed.

>3. The base of the toilet is not sealed, or the glass glue of the base is not done.

>4. There are some firing holes in the toilet base, but these holes are not sealed, and the smell comes out.

The solution of Article 1 is that we can only buy toilet products with better quality, and we can buy better glazed products.

Article 2 suggests that you should use glass glue for the flange, and when you use this kind of glue, you should use water to flush it with water to see if there is any leakage.

Article 3 Most of the toilets that we sleep on now do not use cement to seal the bottom, most of them use glass glue, and we must pay attention to not break it when playing glass glue, and we must play it completely in a whole circle.

The base of the fourth toilet bowl usually has two or three firing holes, and many people don't know about it. Some merchants do not treat the product when it leaves the factory, so after you install it, the smell of the toilet will flow out of the holes here, so we have to seal these holes.

> this little suggestion, in fact, installing a toilet is a kind of technical work, even if the worker is skilled, it is not as good as installing it yourself. When you buy a product, you can also let the merchant package install it, so that you can save the installation fee.

It should be noted that if you want to lay the floor tiles and then install the toilet, this is the correct installation sequence.