Cantilevered balcony load bearing problems

It is not a tofu slag project should not be a big problem, if it has not been built, you can consider using standing bricks, so that it is more assured?

Hello, the cantilevered balcony is generally arranged in the following two ways: plate type and beam type. The lifting plate type is not provided with structural beams on both sides of the balcony and the outer side, the cantilever bending moment is completely borne by the lifting plate, the balcony plate can also adopt a variable cross-section design when the cantilever span is larger, so as to reduce the self-weight load, the structural beam is arranged on both sides of the balcony and the outer side, the cantilever balcony bearing is mainly borne by the lifting beam, and the balcony plate is designed according to the ordinary one-way plate or two-way plate.

No problem at all, put boldly.

250 kg is 250KG=, the balcony design is according to the live load per square meter, and the current load is a dead load, which is advantageous.

The fish tank is placed unilaterally, which is equivalent to a part of the fish tank resting on the lower beam of the board, and there are very few on the board, which is advantageous.

Hope it helps, if you have any questions, call again

In fact, there is no need to build the wall to the top, you can install tempered glass halfway through.

The original structure is the most reasonable, try not to change. It's like paying the price of health for good looks.

Are there corbels on either side of the balcony? If there is no corbel, it is the balcony board that picks it out? How are the steel bars matched?

Generally speaking, it's no problem, but it's really not necessary to build red bricks on the façade of the balcony, isn't it good for you to make a sun room?

Is there a connection beam between the kitchen and the balcony? Are you a frame structure or a brick-concrete structure? If the frame structure or has tie beams, there is no problem.

Certainly not safe. Generally, the outer wall of the balcony is a load-bearing wall, which is not easy to change casually. For the sake of the safety of your home, it is recommended to restore it to its original state.

From the model of the force ruler base is not too big a problem, the four sides add the corner state no column, there are also decorative columns in the middle, which also plays a supporting role, and the bottom of the plate also adds two beams from the photo. However, the specific calculation of the thickness of the plate and the bearing capacity can be known.