-
Anonymous users2024-01-23It's not simple, there is a socket on the bulb, that is, to separate the socket from the lamp, just pull it out, and the buckle on the side should know how to take it. I guess I know where the socket is. It's where the electricity is connected. This bulb is plugged into the lamp seat.
-
Anonymous users2024-01-22The whole thing was removed and replaced, and now it is all LED. It's time to get rid of it.
-
Anonymous users2024-01-21Far water can't save the near fire, find a neighbor.
-
Anonymous users2024-01-20This is the deck's, just open it.
-
Anonymous users2024-01-19Unplug the cord and remove the bulb.
-
Anonymous users2024-01-18The picture is too small and there is no detail.
Under normal circumstances, you can do it with a screwdriver and a screwdriver, so let's explore it yourself.
Turn off the switch and unscrew the light, the bulb should be rotating, to the left or right to unscrew it.
The switch has a long service life and is not easy to be damaged, and the lamp may be broken and try to dismantle the lamp.
Generally, the outer glass cover will have a snap, and you don't need to use too much force to remove it, and then replace the bulb or tube. >>>More
The replacement method of the ceiling lamp and the ceiling lamp is not the same. >>>More
You pull down a little from the side of this downlight, and when you see that there are spring pins inside (on both sides), you can pull the downlight down while holding the card pins inside, so that you can take it off.