How to repair the solid wood multi layer floor when it bumps the skin?

How to deal with the bump skin of solid wood multi-layer flooring:

1. The general paint floor, even if the repair effect is achieved, can not ensure that the environmental protection is up to standard, therefore, the paint repair is best to ask the manufacturer's after-sales personnel to come to the door, the use of the manufacturer's special repair paint or gel and other products, which can not only ensure the repair effect but also environmental protection.

2. The repair method of local damage should first destroy the solid wood floor that needs to be replaced, and then take it out completely. The specific method is to use a tool to chisel a gap in the short side of the solid wood floor to be replaced, and then use a saw to cut the surface of the solid wood floor to be replaced, and then take out the solid wood floor divided into small pieces, but in the process to ensure that the surrounding solid wood floor is not damaged. After removing the solid wood floor, the surrounding glue should be cleaned to ensure that the cleaned tenon groove is easy to install.

If not cleaned thoroughly, the seams will be uneven or loose. When handling the glue, you can use a small piece of solid wood floor with a new tenon to slide back and forth on the interface to find out the residual glue marks and remove them to ensure the beauty of the restored solid wood floor.

3. Saw off the lower part of the notch of the new solid wood floor and clean the entire tenon and groove, paying attention to reserving some space. Glue the tenon of the original floor and the tenon of the new solid wood floor, and then place it in the gap between the waste slabs. First, insert the corners of the long-side tongue and the short-side tongue into the notch edge of the original surrounding floor, then press the side of the notch with your hand, and gently smash the wooden block into it with a special tool.

It should be reminded that before installation, compare whether the new board is consistent with the length of the space, if the new solid wood floor is long, it can be shortened, and if it is short, it can only be replaced with a solid wood floor, resulting in loss.

If the area is small, you can contact the seller, call the maintenance person to do a repair for you, adjust the paint to make up it, the repair rate of the dark color floor is up to 95 or more, if the area is relatively large, it may be seen after the repair, on the surface, I recommend that you replace a few, the price is not too expensive solid wood plywood.

Wooden floors are used due to the movement of heavy objects. If you're not careful, you'll hang the floor. Find a professional repair The effect will be better. It's okay to do it yourself.

Just go buy some toner. Several colors are required. Then add water to bring out the closest color to the floor, lightly click it with a brush, and finally hit it with essential oil.

It's easy to get it, go find the plank decoration team and paint you!