-
Anonymous users2024-01-23It's the ballast inside the lamp that's broken. It's actually not that difficult to fix, but I still recommend that you call an electrician to handle it. All you have to do is take the ballast he removed and go to the hardware store to buy a ballast of the same voltage and press it.
-
Anonymous users2024-01-22It is very likely that the ballast is broken, and it appeared once in our house, and then we bought a ballast and installed it ourselves.
-
Anonymous users2024-01-21The light bulb is broken or the light line is out of order...
Use an electric pen to see if there is a zero line of fire, (the kind of electric pen with a display).
Hello, the kitchen socket has been replaced before frequent tripping, if it is a tripping leakage switch, it may be caused by the wrong wiring of the socket. It is very likely that the neutral and ground wires in the socket are reversed before tripping. Check the neutral and ground wires of the lower socket, if the wiring is correct, it is likely that the line insulation is too low and the line is tripping. >>>More
This depends on the use time of your lamp If it has exceeded the service life that the merchant told you when you bought the lamp, it is likely that it cannot be used But look at your lamp is not very old It should be a problem with the connection between the switch and the lamp But I think you should find a professional to take a look After all, the use of your lamp is quite large And the price is not cheap If you blindly go to it may bring some unnecessary trouble I hope to adopt Thank you.
There are four dialable clips above the four bezels of the lampshade, and the cover can be removed by dialing the direction.
1. Uniform paving according to the bottom blank arrow: this can control the unevenness of the tile to the greatest extent, and the overall paving is smoother. Some manufacturers use letters to identify the direction of paving, but you have to look carefully. >>>More