-
Anonymous users2024-01-231 After the construction of the geothermal system is completed, it is necessary to wait at least about two months before the floor can be paved to ensure that the ground moisture content reaches the standard. 2. The ground must be horizontal within the range of any two meters in diameter, and the height difference shall not exceed 3mm. (Suspension straight paving method and adhesive keel laying method) 3 Before laying the floor, it is recommended to carry out a geothermal heating test, the water temperature is at least 50, observe the ground situation, ensure the operation of the heating system, and adjust the indicators in time.
3 Before laying the floor, the pressure test of the geothermal system should be carried out to prevent damage to the floor due to the leakage of the geothermal pipeline.
-
Anonymous users2024-01-221. Be sure to find a construction team with professional knowledge of floor heating. "Three points of flooring, seven points of installation", the effect of the amateur decoration team is self-evident.
2. The tightness of the floor heating system must be checked before paving.
3. The ground must be dry (it can be judged by experimental phenomena), and the moisture content of the cement floor should be lower than that; The indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity is about 60 degrees before and after installation.
4. It is strictly forbidden to nail the ground during construction. After the construction is completed, nailing is also prohibited on the ground to prevent damage to the heating coil.
5. Before laying the laminate floor, the EPE composite film should be laid (the EPE composite film must be marked with the words special for floor heating radiation) to isolate the moisture and release the moisture from the surrounding baseboards.
Solid wood floor heating floor is an upgraded product of solid wood flooring, each piece is natural pure solid wood, is the healthiest material in the pavement material, Jiusheng solid wood floor heating floor has the third generation of the latest lock technology - ternary anti-lock technology, microwave molecular shock, silent moisture-proof, balance core and other technologies, more heat resistance, more stable, better thermal conductivity and constant temperature performance;
The "tiger tongue tenon" solid wood lock technology invented in 2000 can connect all floors into one, realize the effect of simultaneous expansion and contraction, and relieve wood stress; Technologies such as material selection, balanced health and six-sided finishing have greatly reduced the value of wet expansion and contraction of wood flooring, which makes solid wood flooring have extremely high thermal stability and moisture stability.
It should be demanding – because it directly affects the tightness and firmness of the ground!
Solid wood double-lock floor heating is the same as a double-lock floor. >>>More
Environmentally friendly, I picked a solid wood floor for a long time, and finally chose Lin Chang, it is really good to use, and there is no smell in the room when it heats up in winter.