The toilet itself flushes very slowly, and who knows what s going on when it can t be blocked with b

Updated on Toilet 2024-04-28
1 answers
  1. Anonymous users2024-01-23

    There are two common reasons why the toilet is not flushing:

    1. The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although there is action. Solution: Please shorten it to the appropriate level.

    Or the top press bar of the top press toilet is low, resulting in the water stop pad moving but quickly stopping the water. Solution: Open the water tank cover, reverse, loosen the pressure rod nut, and adjust the length of the pressure bar to the appropriate one.

    2. The water level of the inlet valve is low, resulting in weak water outlet.

    The solution is to remove the inlet valve and remove the inlet valve buckle. Turn the inlet valve body counterclockwise. Then increase the height of the body accordingly.

    Then rotate the inlet valve body clockwise and attach the buckle. Finally, install the inlet valve. Connect the filter and water inlet pipe, and the fault can be eliminated.

Related questions
Faenza's toilet, which has been used for 10 years, does it need to be replaced? There is still a com
2 answers2024-04-28

The reason why the water cannot go down is not necessarily related to the length of time the toilet is used. It should be that the pipe is blocked, and someone can be found to dredge it. Routine maintenance can also be carried out with a "pipe unclogging agent" to ensure that the drainage of the pipeline is unblocked. >>>More

What's going on when the toilet flushes slowly under the water
1 answers2024-04-28

There is something clogged, I have tried this situation before, as long as I pour hydrochloric acid into the toilet bowl and do not flush, about 1 hour later press the flush to try the effect.

After the toilet flushes, the water goes down very slowly! Last time, the toilet had to be flushed s
2 answers2024-04-28

It's blocked, as long as it's not a big thing. Buy a special dredge toilet, and it will be done quickly

The toilet in the dormitory is very slow, and it is easy to block the stool when going to the toilet
2 answers2024-04-28

When flushing, use a basin and add a basin of water at the same time should be fast, if there is an effect, open the lid of the water tank and raise the water level in the tank

What should I do if the toilet flushes half a bucket and the water is very slow?
6 answers2024-04-28

When flushing, the water must be ventilated into the sewage pipe, that is, one in and one out, but when flushing, the air only enters and does not come out, which will cause the water to flow very slowly in the seat, either the air hole of the sewage pipe on the floor is blocked, or the master has changed the underground sewage pipe when making the pipe. >>>More