Waterproof the toilet at least a few times

Bathroom waterproofing, it is recommended to use kitchen and bathroom waterproof slurry directly, it is specially developed for the easy to seepage parts of the bathroom, so the waterproof effect is better. Here's how to do it:

1.Clean the base surface and sprinkle it with water to moisten but there should be no stagnant water.

2.Prepare the quick-setting repair mortar, add water to the quick-setting repair mortar according to the ratio of 3:1, and the adjusted mortar needs to be used up within 5 minutes. The quick-setting repair mortar is evenly brushed on the yin and yang corners, pipes, sanitary ware, floor drain periphery and other parts that are prone to water seepage.

3.Pour the waterproof liquid and powder into the bucket, then stir evenly with an electric rod, let stand for 3 minutes and stir again for later use.

4.Paint waterproof coating, the bathroom floor needs to be done, the wall needs to be painted at least to the meter, it is recommended to do the full height. Brush 2-3 times, the total thickness is in.

5.After the waterproof coating is dry, it is recommended to make a protective layer of mortar in order to ensure strength.

After the hour, sprinkle water for maintenance, and the part exposed to direct sunlight needs to be covered.

Before the floor heating construction, do a waterproofing, after laying the pipe, there is a 4 cm mortar leveling layer, and after the leveling layer is done, do waterproofing again. What the specific name of the material is I don't know, it's the color of gray and gray, and after a bag of powder and liquid is mixed, it is rolled up with a paint roller. Waterproofing is 2 times in total.

2 times, each water off experiment for 2 days.