-
Anonymous users2024-01-23Turn both water valves on, heat without plugging in, and then turn on the shower to see if the shower does not come out of the water. If the shower comes out of the shower, it means that the water heater is already filled with water.
Then, adjust the hot water valve to observe the amount of water coming out of the shower to see if the hot water valve has control over the hot water.
In addition, you can heat it by filling it with water, and then try whether the hot water faucet is working normally.
-
Anonymous users2024-01-22I don't understand what you're saying, but no matter what the water heater is, it won't affect the toilet.
-
Anonymous users2024-01-21You'll need a high-pressure hose.
-
Anonymous users2024-01-20The toilet is connected to the water heater, not the tap water.
-
Anonymous users2024-01-19Is this a domestic water heater?
It's best to bring them together so that they don't have to fight each other. In this case, it is the easiest to fight each other.
Plug the network cable into the route, and then plug it into the set-top box, and you're good to go.
Write: Honor and disgrace are not shocked, mainly reflecting your father's turbulent life, which is very tasteful. Neither worldly nor utilitarian, very peaceful, but very substantial. Hope it helps.
If used.
It is necessary to do the bathroom waterproof, not waterproof when you take a bath. >>>More
If it is a gas water heater, first check whether the water heater is ventilated, check whether the power socket is energized, or the ignition electrode of the water heater cannot be ignited, these reasons will cause the water heater to not produce hot water.