-
The chandelier is basically fixed with expansion bolts to fix the iron bar, there is an iron bar knot chassis, which can be a screw lock and a pull-back suspension, and then the screw is screwed back. In short, it is nothing more than hanging or tightening from the four eyelets you mentioned. Unless you're spinning in the opposite direction, be patient. Not by brute force.
-
It will definitely be able to be dismantled, so I can send a photo to see how to solve it for you!!
Insert a utility blade into the edge of the lamp, then pin the blade slightly and pull it out to remove it. I hope my answer can help you.
1. First unplug and turn off the power. Do cracks.
2. Secondly, unplug the rectifier and remove the spring. >>>More
First, suck down the gusset next to it with a suction cup, and you can see the keel, and then it is convenient to remove the lamp. My family bought a drizzle sunshine LED square lamp, and it was okay to use, and the bulb has never been broken.
1. Power off.
2. Disconnect the power cord of the ballast, that is, the two white wires of the ballast without a protective cover. >>>More
There are a few things that need to be done to replace the toilet ceiling light: >>>More