-
Anonymous users2024-01-23This is the light switch on the zero line, and there is still electricity on the lamp after the light is turned off, such as fluorescent lamps, LED lights, and energy-saving lamps. The solution is to swap the live line and neutral line of the entrance line.
-
Anonymous users2024-01-22The insulation performance is not good, and there is this phenomenon in 80%. It does not affect normal use.
The usual bai decoration if the lamp in the home.
After turning off the LED power, you can also see the weak light dao line, most of which is inductive internal electricity, the current is weak and weak, and the meter is not run. You can follow the following path to troubleshoot and solve the problem step by step; >>>More
This is not a problem of zero control and fire control, if you really use LEDs, this kind of problem will not occur.
Induce electricity, the current is weak, and the meter is not run. The landlord replaced the two wires under the switch of the lighting switch of the distribution box at home to ensure that it is no longer bright, remember to give my family points. Pay attention to safety when adjusting the cable, and pull down the switches to ensure safety.
If the zero line and the live line of the household are not shining, then the problem will be solved, and there will be no more reasons to worry about it.
This is generally your switch is not connected to the live wire but to the neutral line, so when the switch is disconnected, the live wire is still connected to the LED driver, and there is an induced voltage on it, so the LED has afterglow. The solution is to reconfigure the wiring of the original switch and reconnect it to the live wire (it is recommended to find a professional electrician), so that the phenomenon that there is still afterglow on the LED when the switch is disconnected.