Excuse me, how can I do it if the toilet pump is not strong, thank you

Updated on Toilet 2024-03-31
1 answers
  1. Anonymous users2024-01-23

    1. Clean up the garbage (it may be blocked), find someone to clean it up, or use the water rats yourself.

    2. Increase water (flush toilet is the principle of using a siphon).

    3 replace the toilet with a new one (I feel like this...) It's a big fuss)

    Related questions
    2 answers2024-03-31

    The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

    2 answers2024-03-31

    You can only use the leather puff to suck, or use a professional dredging spring to dredge, I believe you don't have this thing, if the blockage is not bad, use the leather puff, if it is powerful, find a professional dredge phone in the corridor, call someone to help you, and the ultimate way, is to remove the toilet and then pass, is more troublesome.

    1 answers2024-03-31

    You can spray insecticides, and the flying insects are gone. In the future, it is necessary to do a good job in the bathroom hygiene, because there are flying insects if it is too dirty.

    5 answers2024-03-31

    The toilet can't pump water, you first have to consider whether the toilet is blocked, the way to check whether the toilet is blocked: flush the toilet with a basin with water, if you use a basin to flush the toilet, you can flush it normally, indicating that the toilet is not blocked. At this time, it can only be that there is a problem with the accessories in the toilet tank, you can use a basin to add more water to the tank, and then press and hold the toilet button for a long time to observe the flushing effect, if the flushing effect returns to normal, then the problem is basically found, this is the toilet tank accessories are broken.

    2 answers2024-03-31

    There is too much dirt in the toilet, it is too hard, and it is possible for the wife to block it. For general blockages, you can go to the supermarket to buy skin pullers, and you can get through them by pulling them out a few times in a row.