The glass glue at the bottom of the toilet bowl is dirty, why can t it be cleaned with a steel wool

The glass glue at the bottom of the toilet bowl is dirty and cannot be cleaned with a steel wool ball. Because in the process of cleaning, it is easy to break the glass glue, or simply tear off a section. In this way, either the bottom of the toilet is easy to leak, or it is easy to leak smell, which will cause the bathroom to be unclean.

1. Glass glue is used to seal the bottom of the toilet.

When we install the toilet, the best choice for dealing with the gap on the side is glass glue. Because the glass glue dries quickly, there are no edges and corners, and its color is also white or transparent, which is very similar to the color of the toilet bowl and does not look obtrusive.

The effect of the glass plastic back cover is very good. Generally, after the back cover, as long as it is not man-made, it will not be broken for a few years. There are even some people who can use it for ten years and never need to replace it.

2. It is good to clean the rag frequently on weekdays

If a person has developed the habit of cleaning the bathroom frequently, the glass glue will not become dirty. Only after a long time of not cleaning, slowly the glass glue turned yellow, blackened, and looked dirty.

That's it, it is still recommended to wipe with a rag, you can use dish soap or kitchen and bathroom cleaner together, use it to wipe many times, or keep it clean.

3. If it feels too dirty, re-seal the back

So, sometimes it's really too dirty, but it can't be cleaned up, what should I do? It is also recommended to re-cover the back, so you don't need to waste time cleaning it repeatedly.

All you need to do is buy a bottle of glass glue and a glue gun. Clean the old glass glue, clean the floor, and re-seal the back. After waiting for half a day, it will be ready for normal use, and it will become clean and tidy again.

I just thought that the glass glue was yellow, and it didn't look good. I found that the rag could not be cleaned, so I brushed it back and forth with a steel wool ball, and as a result, there may be cracks, and I didn't pay attention to it. In those days, there was always a smell in the toilet and water coming out of the toilet.

Think about it, I accidentally destroyed the glass glue on the back cover.

After the glass glue at the bottom of the toilet bowl is dirty, it is not clean with a metal ball, because the mold is already glass glue mold. Using steel wool balls will scratch the glaze of the toilet.

Because it will leave a lot of scratches on the glass glue, it is easier for bacteria and dust to hide inside the glass glue and become dirty, and it is not effective to use steel wool balls.

Because if you use steel wool to clean the glass glue, there will be a lot of scratches on the glass glue, so that a lot of dust will go into it, and if you clean it again, it will not be clean, which is worse than the previous one.

Glass glue is a kind of solid glue, if you clean it with something hard, it will scratch the gel, and it is easy to cause water leakage, so if the glass glue is dirty, wipe it with a rag and detergent.