Laminate flooring on hardwood floors

It must be the second option.

Because the wooden floor underneath is likely to deform again.

If you lay laminate flooring directly on top, it will be more troublesome.

It is ideal to fix the leakage first, level the floor, replace the useless ones, and then re-polish and paint. The cost of polishing and painting is about 25-35 yuan per square meter. If you put laminate flooring directly on top of it, this will not work.

Either remove the original solid wood flooring, and you are not willing to do so, level the ground and directly lay the laminate floor.

Well, first of all, we must solve the problem of leaking water pipes, dismantle the original floor and install it, maybe you will have less trouble in the future

Since it's for my own home, I think it's better to change it. Now that it's repaired, what should I do if it leaks again in the future! Or if there is water on the floor, it will be very troublesome at that time.

Laminate flooring is fine on top of old hardwood floors, but it just adds a certain amount of thickness, and it may be necessary to change the doors and add edge strips to the threshold filtration area. Before paving, the old floor needs to be dealt with, and the bulging place should be smoothed (grinding, planing, chiseling, dismantling and reloading, there are many ways), and the large defects should also be filled.

The thickness of the laminate floor is the increased thickness, and there is no need to add moisture-proof cotton, just suspend the installation directly, hit nails, and glue.

Of course, if the old floor is rotten badly, or there are termites, then it is better to tear it down and redo it! It is best to use cement leveling, or use splints, not large core boards, the strength of large core boards is not enough to hold nails.

In fact, solid wood flooring can be renovated, as long as the damaged part is reinstalled, and then the whole is sanded, putty is scraped to repair the joints, and the floor paint is painted. In this way, the floor is brand new, and even better than the new floor in some aspects, which is an overall effect, and the edges are also sealed with elastic glue, and the floor is not even afraid of soaking in water. In order to avoid paint contamination, you have to use expensive water-based floor paint.

It is best to remove the solid wood floor, and if the ground is uneven, use cement to re-level the ground to eliminate hidden dangers.

The existing floor has been blistered and bulging, and if it is laid on top, it will be more troublesome to remove it and resurface it when the problem is serious in the future.

Solid wood floor paving should be made of ground keel, since it has been soaked in water, the ground keel may rot, or re-pavement!

Laying laminate flooring directly on solid wood flooring will be a little more economical, probably about centimeters higher, you have to consider the gap under the door; However, the pursuit of foot feeling is that cement leveling the ground will be a little better (during construction, it must be paved, otherwise the composite floor will not be paved); Lay laminate flooring directly on solid wood flooring, and it will make a noise when you walk; In order to save trouble, decoration companies often introduce you to pave the floor with a large core board, please think twice!

Solid wood floors can be laid and warmed. However, the rotten floor should be removed, the removed part should be leveled with slabs or cement, the old floor should be flattened where the bulging place is, and the loose place should be nailed. Don't forget to remove the old baseboard.

If the old floor is demolished, it is intended to be leveled with cement, which is economical and affordable, and the good workboard is expensive, and the formaldehyde of the broken workboard exceeds the standard and is hollow.

It can be paved directly, there is no problem, and there are only high after paving, which is not in the way.

Note that a layer of foam paper is laid underneath.

If you want to dismantle, it is best to use cement.

In your case, it is better to remove the original solid wood floor and rebuild the laminate flooring.

There are two reasons for this:1The solid wood floor is easy to produce sound after a long time, and the gap between the keels is easy to hide dirt and dirt, and if the original solid wood floor is uneven, the composite floor is easy to rise and fall and loosen if it is laid on it.

2.Your current room height is only one meter, and after removing the solid wood floor, you can save about 3-5 cm of space by laying laminate flooring and removing the floor leveling.

It is better to use cement for ground releveling, or self-leveling is also possible.

1. Laminate flooring can be directly laid on solid wood flooring.

2. If the solid wood floor is removed and the ground is leveled again, it is good to use cement.

It's not that tall, it's about 2 centimeters.