-
Anonymous users2024-01-23A nylon mat inside is worn out because of the switch all the time, resulting in no cushioning effect, as long as the screws on both sides are tightened, as for the change, you can wait until you can no longer tighten, of course, you can call a professional to change one, it doesn't cost a few dollars, saving time and effort.
The mounting hole on the toilet seat is equipped with a buffer oil core, the toilet lid and the seat ring are respectively connected with two connecting handles, the two connecting handles on the toilet cover, one is a round hole to play a supporting role, one is a flat hole, plays the role of transmitting torque, the two connecting handles of the seat ring and the connecting handle of the cover are of the same meaning, and the round and square holes of the connecting handle are connected with the shaft core of the buffer oil core.
-
Anonymous users2024-01-22The toilet lid retarder at home is broken, Taobao bought the payment reducer to change it by itself, I haven't changed it for a long time, the following is the process, remove the toilet lid and turn it over, there is a plastic cover to remove it, and then use pliers to hold the head of the retarder and pull it out, and the new one is OK, is it very simple, you can refer to the picture, the retarder is divided into left and right, a tube cover, a tube cover, can not be installed, otherwise it can not be used. There are many kinds of different models, and the pictures are for reference only.
It can't be adjusted, those are plastic parts, which are produced by clamping, so they will basically be like this after grinding for a period of time.
Normally, the toilet lid is slowly broken, it should be a problem with the damping system of the toilet seat, Huai Fangji encounters this situation, you can directly buy a new pair of toilet lid damping, and replace the old damping. >>>More
Look at how long it has been used, find a dealer to replace it during the warranty period, the national standard is 50,000 times of service life, and it is no problem to use it for 5 years.
The reverse card is the name of this mechanism, and the 3-layer structure from the inside to the outside is the shaft, the shaft sleeve (with a base), and the outer coat. Stubble is that there is no obstruction in this direction of rotation and can be turned. Reverse stubble is that there is a block in this direction of rotation and cannot be turned in this direction.
The connection can be replaced by unscrewing the screws.