-
Anonymous users2024-01-23Toilet: 900 (W) 1520 (D) 2000 (H); Squatting toilets: 900 (W) 1220 (D) 2000 (H).
There are many places that are not limited by area, and how big should we control the size of the toilet partition when the space is large enough? We believe that the size of the sanitary partition at this time should be .
It's okay to be bigger, but beyond a certain range, it will make people feel uncomfortable, for example, if you make one, not only wastes space, but also makes people feel insecure.
-
Anonymous users2024-01-22The blocking size of the public restroom is meters. The basic standard is this, the length of the toilet is about 1 meter, the width is meters, if the depth of the urinal is meters, the width is meters, and the toilet occupies a small area, generally between. The building of public toilets must be ventilated, and the lighting area and the ground area are generally not 1 to 8, and skylights can be added when the floor area cannot meet the requirements.
-
Anonymous users2024-01-21The basic standard is this, the length of the toilet is about 1 meter, the width is meters, if the depth of the urinal is meters, the width is meters, and the toilet occupies a small area, generally between.
The building of public toilets must be ventilated, and the lighting area and the ground area are generally not 1 to 8, and skylights can be added when the floor area cannot meet the requirements.
-
Anonymous users2024-01-20The general public health partition size standard is 900 (W) 1520 (D) 2000 (H). This size is just a general size, and sometimes it can be slightly adjusted according to Party A's requirements.
-
Anonymous users2024-01-19What is the height standard for public health partitionsAccording to the "Design Standard for Urban Public Toilets CJJ14-2016", the height of the upper edge of the partition and the door from the ground: Class I and Class II public toilets should not be less than Class III public toilets.
It depends on the economic strength of the user and the actual environment. There should be no standard for the time being. The current bathrooms are 3 square meters or smaller, and there are 30 or 40 square meters [in the villa]. >>>More
The size of the block between public health is from meters. The basic standard is like this, the length of the toilet seat is about 1 meter, the width is meters, if the depth of the urinal is meters, the width is meters, and the toilet occupies a small area, generally between. The building of public toilets must be ventilated, and the lighting area and the ground area are generally not 1 to 8, and skylights can be added when the floor area cannot meet the requirements.
The height standard of the waterproof layer of the bathroom should be determined according to the different positions, first of all, the waterproof layer of the wall is generally 30 cm upwards from the corner of the wall, the height of the bathing place is generally 180 cm, the height of the basin is 100 cm, the waterproof layer and the ground waterproof are required to do 2 times, do not leave the construction joint in the corner of the wall when waterproofing, the ground waterproof layer should be painted out of the bathroom door 30 cm high, the waterproof floor waterproof layer should be 20 cm higher than the ground. >>>More
The blocking size of the public restroom is meters. The basic standard is this, the length of the toilet is about 1 meter, the width is meters, if the depth of the urinal is meters, the width is meters, and the toilet occupies a small area, generally between. The building of public toilets must be ventilated, and the lighting area and the ground area are generally not 1 to 8, and skylights can be added when the floor area cannot meet the requirements.
Bathroom exterior window design dimensions.
The bathroom is a very private place and needs better lighting, so the window sill of the bathroom is about 130 cm to 150 cm high, and the window sash is hung up, so that the window can not only be opened for ventilation, but also protect privacy. >>>More