The screws of the toilet seat at home are broken, can you match it?

Labor costs are getting higher and higher day by day, and there is no way to "pamper" anymore, and there is a problem with the water and electricity at home, such as replacing the faucet, replacing the toilet lid or something, so you have to come by yourself. Most people are usually timid about these jobs, mainly because they don't understand it, but in fact, it's still very simple, and they find that the high cost they paid before is not worth it.

The toilet at home has been used for a long time, and the toilet lid is the most likely to break, and it is often loose and causes it to fall down when it is opened. Change the toilet seat and prepare the materials, and it can be done in five minutes.

Materials required: a set of toilet seats with accessories (including a pair of toilet seats, 2 screws, 2 square tenons, and 2 sets of nuts).

Steps to change the toilet seat:

1. Loosen the screws that fix the toilet lid under the back side of both sides of the toilet first, and remove the old toilet seat.

2. The two screws in the fitting are inserted into the square tenon first, and then put into the iron shafts on both sides of the toilet seat.

Answer: You can first use a hand saw to see off all the remaining parts of the screws, and then use needle-nose pliers to unscrew out the broken screws, and then go to the hardware store to buy a screw of the same size, put it back in its original position, and then the toilet seat can be used normally. Be careful when sawing screws with a hand saw to avoid damaging the toilet seat, and if you are not sure, you can find a professional master to repair it.

Yes, those who sell bathrooms have accessories for sale.

Yes, you can get it at the hardware store.

Take the broken screw and look for it at the toilet shop.

If you know what brand the toilet is, you should be able to match it when you go to the store.