-
Anonymous users2024-01-23Connect your computer to any LAN port of your router, go to the installation page, and modify your router's WiFi name (SSID) and password. Here's how:
1. Open the browser, enter the IP address of the router gateway in the address bar, and enter the login username and password (usually the administrator).
2. After logging in successfully, display the running status and click "Wireless Settings".
3. Click "Wireless Security Settings", the wireless network name (SSID) is a name, which can be filled, usually letters + numbers;
4. Then set the password, generally choose WPA-PSK WPA2-PSK encryption method (8 16 passwords, can be combined with letters and numbers).
5. After setting the password, click "Save" and "Prompt" to restart. Click Restart Router in System Tools to restart the route.
-
Anonymous users2024-01-221. Open the browser, enter the address in the specific reference manual for the return bucket) to enter the router, the default login and password is admin (if you have changed the password, please enter the password you have modified).
2. Enter the router server, select "Wireless Settings Clearing" - Wireless Security Settings 3, and enter a new password in the "PSK Password" column.
4. Click "Keep" to change the password.
-
Anonymous users2024-01-21Hello, you click "more" first, there is a "settings" in the lower left corner after entering, open, the first line has a "network" after you go in, you can find that there is a "wifi password", click this to change the password.
Hope it helps.
-
Anonymous users2024-01-20Connect the computer to any LAN port of the router, enter the settings page, and change the WIFI name (SSID) and password of the router. Here's how:
1. Open the browser, enter the IP address of the router gateway in the address bar, and enter the login username and password (generally admin);
2. After successful login, the running status will be displayed, click "Wireless Settings";
3. Then click "Wireless Security Settings", the wireless network name (SSID) is a name, you can fill in at will, generally letters + numbers;
4. Then set the password, generally choose WPA-PSK WPA2-PSK encryption method (the password should be 8-16, which can be a combination of letters and numbers);
5. After setting the password, click Save to prompt restart;
6. Click "Restart Router" in "System Tools" to restart the router.
-
Anonymous users2024-01-19If I can't connect to the living room, what should I do if my parents have wifi?
There are two ways to get the password of a certain WIFI:
1. Ask the WIFI owner, and he will tell you the password and you can use it. >>>More
Anti-theft door smart password lock installation skills: 1, the inner and outer panels are not equipped with handles, according to the left and right direction of the door, please first install and fix the handles on the inner and outer panels, please be careful not to install them in reverse. 2. Insert the lock cylinder into the lock body hole, slightly tighten the lock cylinder bolt, and turn the lock cylinder lever, one is to verify that the lock cylinder is installed in place; the second is to verify whether the unlocking status is smooth; After confirming the qualification, fix the lock cylinder bolt, and the lock cylinder lever is exposed to 15+-3 mm. >>>More
1. Press and hold [Volume Up], [HOME Button], and [Power Button] at the same time in the shutdown state, and wait for the screen to light up before you can release it and enter Recovery mode. 2. After entering the recovery mode, the English selection interface will appear, select Wipe Data Factory Reset to OK - and then select the middle line YES - DELETE; Are you sure. 3. Select Wipe Cache Partition again. >>>More
If you can't go online, try the following methods:
1: Laptop look at the wireless wifi to open no general wifi shortcut key Ctrl+F5 >>>More
Not necessarily, this parameter can be modified arbitrarily. >>>More