-
Anonymous users2024-01-23The quality is not up to standard.
The porcelain on the toilet bowl is actually a layer of glaze that has been burned at high temperature, and a good glaze is fired at about 1000, which is resistant to high temperature and corrosion, except for hitting it with hard things such as ironware, the porcelain will not fall. Porcelain loss can only be caused by the quality of the glaze control temperature during the firing process or the conditions during firing.
-
Anonymous users2024-01-22Big brother bought the defective product, hurry up and let me change it! Not everything can be repaired!
-
Anonymous users2024-01-21The quality is too poor, the so-called porcelain on the toilet bowl is actually a layer of glaze layer that has been burned at high temperature, and a good glaze is fired at about 1000, which is resistant to high temperature and corrosion, except for hitting it with hard things such as iron, the porcelain will not fall. Porcelain loss can only be caused by the quality of the glaze control temperature during the firing process or the conditions during firing. If it is recommended to replace it during the warranty period, it is really not possible to repair it, and the repair effect is definitely not as good as the original.
If you can't do it, you can only replace it with a new one.
I recommend using Faenza, Kohler, TOTO, Wrigley Arrow, Huida, etc.
The toilet is a necessary bathroom product in our life, and for families with the elderly and children, they will basically choose to install a toilet, because it will be more convenient to use. However, during the use of the toilet, there will be some problems, such as the sound of the inlet valve. So, what is the reason for the leakage of the toilet inlet valve? >>>More
It's blocked, and it's going to get through the sewer.
The toilet is backwater, and I think it's possible that it's blocked.
There are three scenarios for a leaky toilet:
1. The water leakage at the water inlet of the water tank, the water leaks to the toilet, the solution is to remove it to see if the rubber pad has been damaged, if no harm is found, you can try to change the direction of the rubber pad to install it. If it doesn't work, then you can only replace the rubber pad; >>>More
Causes of blocked pipes, low water pressure, and stuck toilet valves.