How to dismantle the toilet, can you dismantle it yourself?

Yes, it won't break.

1. How to dismantle the toilet.

1.First of all, it is necessary to observe whether there are cracks in the toilet, because the toilet is generally made of ceramic, and if there are cracks, it is easy to hurt the construction personnel in the process of removing the toilet. Therefore, wear gloves during construction, and then remove the water tank cover and put it in a place where there is no water, turn off the water source to remove the water in the water tank, and be sure to press the handle of the water tank and do not put it, so that the water can be discharged completely.

2.Use a tool to remove the remaining water from the toilet bowl, and then use a dry rag or sponge to wipe the water inside the toilet bowl dry. Then remove the hose that connects to the toilet bowl and pour the excess water into the bucket.

3.Use a hacksaw to cut the screws connecting the water tank and the toilet, and you can prepare a small single-handle saw to facilitate the use of small spaces. If the toilet is glued to the floor with gap filler, then use a tool to cut the sealant directly, then gently shake the toilet to loosen the sealant, and then lift the toilet bowl, pay attention to keep its back vertically raised, and put it next to it.

At this time, be sure to block the mouth of the drain pipe with rags or other things to prevent the odor of the sewer from running out and debris from falling into the drain.

No matter how the toilet is dismantled, there are some details to pay attention to. For example, before dismantling, it is necessary to determine whether the toilet is drained under the drain or side, and if it is drained, the toilet should be purchased according to the size of the distance from the spout to the wall. If the size of the toilet is too small, it will cause a large gap between the water tank and the wall, and if it is too large, the drain of the toilet will not match the drain outlet.

How do you remove a toilet?

1. How to dismantle the toilet The first step is to check whether the toilet has cracks, it is made of ceramic magnet and is easy to hurt people, and it is necessary to wear protective work gloves when working. First remove the lid of the water tank and place it in a place where there is no water, turn off the water source to flush the water in the water tank, press the flush handle and do not put it, let the water run completely and wear rubber gloves, and use a sponge or towel to dry the water in the tank that has not flowed away.

2. The next step is to use a tool to get rid of the remaining water in the toilet, and then you can use a dry towel or sponge and other absorbent things to dry the inside of the toilet. The bolts may not come out, and it can take hours to remove the tank from the toilet seat. Remove the connected hose from the toilet bowl and pour the excess water into the bucket so that the tank is connected to the toilet seat.

3. We can use a hacksaw to cut off the bolts and disassemble them, and we can buy a single-handle saw to facilitate work and use in a relatively small space. If your toilet bowl is glued to the floor with gap filler, you can use a tool knife to cut the sealant. Gently shake the toilet to loosen the adhesive sealant and lift the toilet again.

What are the precautions for removing the toilet?

1. The waterproof engineering of the toilet at home must be done carefully, especially when the toilet is replaced, the toilet sewer pipe should be waterproofed, because when the old toilet is dismantled, the original waterproof layer is easy to cause damage. Therefore, during the insurance period, it is better to do waterproofing again to avoid unnecessary trouble to the family.

2. Before disassembling the toilet, we must first determine whether the lower drain or the side drain of the toilet at home is clear, so as not to cause the wrong toilet to be purchased and not used. If it is a drain, measure the distance from the drain to the back wall and then buy the toilet according to the size, after the installation of the small size, the toilet tank will leak a large gap from the wall, if the size is large, the drain of the toilet and the drain of the floor drain will not be used.

Then everyone should have an understanding after reading it. In addition, although we know how to remove the toilet, it is necessary to learn the precautions for removing the toilet, but it is recommended that it is better to let a professional get it when replacing the toilet, so that it will be more assured. I hope what is written above can help you and serve as a reference suggestion for you.