Is it okay if the bathroom wall is not waterproof, but only the ground?

The wall of the bathroom needs to be waterproofed, which is the standard of architectural decoration, which can not be ignored, and it will also affect your residence if you do not do waterproof for a long time, because there must be a room next door to your bathroom, and there is a simple decoration on the wall. If your hygiene has not been waterproofed for a long time, the water on the bathroom wall will easily corrode and affect your other rooms, so it is necessary to do waterproofing on the bathroom wall.

No, the bathroom is waterproof, the standard requirement is that the ground needs to be done, the wall should be at least meters high, it is recommended to do full height, if it is a light wall, it must be done full height, only in this way can the lasting waterproof effect be ensured.

As for the material, it is recommended to use kitchen and bathroom waterproof slurry, and the following is a detailed construction method:

1.Clean the base surface and sprinkle it with water to moisten but there should be no stagnant water.

2.Prepare the quick-setting repair mortar, add water to the quick-setting repair mortar according to the ratio of 3:1, and the adjusted mortar needs to be used up within 5 minutes. The quick-setting repair mortar is evenly brushed on the yin and yang corners, pipes, sanitary ware, floor drain periphery and other parts that are prone to water seepage.

3.Pour the waterproof liquid and powder into the bucket, then stir evenly with an electric rod, let stand for 3 minutes and stir again for later use.

4.Paint waterproof coating, the bathroom floor needs to be done, the wall needs to be painted at least to the meter, it is recommended to do the full height. Brush 2-3 times, the total thickness is in.

5.After the waterproof coating is dry, it is recommended to make a protective layer of mortar in order to ensure strength.

After the hour, sprinkle water for maintenance, and the part exposed to direct sunlight needs to be covered.

It is recommended to do my bathroom wall has not been done for only two years, resulting in the bedroom wall is damp and moldy.

The bathroom is a place that is more exposed to water, and it is recommended that the wall also have a waterproof layer.

It is recommended that you use the JS waterproof material of the Qinglong brand. After making the Qinglong JS waterproof material, then you can stick the tiles.