What should I do if the iron pipe in the bathroom is rusty and leaking?

If it is a water pipe meter in front of the water company warranty, the meter behind it belongs to our own, so it is our own solution, and if you don't know it, you can find a housekeeper to change.

If there is a property, let them deal with it, it must be a shared pipeline. If you want to get it yourself, it is to find a semi-circular iron pipe, weld two nuts on both sides, use two steel strips to punch holes at both ends, and tighten them with screws respectively.

Find the tape to plug the leak first, and then prepare to change the tube.

There are people who specialize in repairing this kind of pipe, so it would be good to find someone who repairs water pipes to repair it. If you don't know anyone in this area, you can go to the property for help.

The iron pipe in the bathroom is rusty and a little leaky, so you should find a professional to replace it with a plastic pipe.

Ask what to do if the sewer pipe is leaking.

Iron and pig iron cannot be dry.

Deal with the fart and don't talk back.

1. The iron pipe with a diameter of 2 cm is leaking but the iron pipe is not embroidered, but only part of the position is damaged, close the main valve of the water pipe, and only need to replace the iron pipe at this position! Cut off the water pipe at the location, use the wire with the instrument to the thread, and connect the head on the street.

2. The leakage of the iron pipe with a diameter of 2 cm is caused by the rust of the overall water pipe, close the main valve of the water pipe, replace the water pipe as a whole and put the two ends on the screw buckle and screw it on.

3. If the iron pipe with a diameter of 20 cm is leaking, if there is a problem with the connector, replace the joint part. If there is a water leakage in the pipe body, grind off the embroidery of the original pipe body, and pay attention to the need to inlay an iron plate that is tightly attached to the water pipe at the repair position for reinforcement treatment.

The question is a large sewer pipe leaking.

Answer: Wait a minute 1, the iron sewer pipe is most prone to rust and leakage, in this case, the best solution is to change the entire sewer pipe to PVC material, in order to completely solve the problem of pipeline leakage.

2. But if it can't be replaced, you can buy two PVC pipes according to the size of the iron sewer pipe. Saw off all the rusty and leaky areas and replace the PVC pipe. The part with the big head is sleeved on top of the iron column pipe, and the part with the small head is inserted under the iron pipe, and a section of PVC pipe interface can also be added.

3. The interface must be cleaned and evenly coated with structural glue or nail-free glue. After solidification, it can be sealed, which can avoid the problem of rust and water leakage in the future. If there are still gaps, you can also use plastic steel cement to plug the gaps, so that there will be no problems.

You can find the property to take a look, and the property has the phone number of the maintenance person in this regard.

You need to change the iron pipe, because this iron pipe will take a long time, there will be this situation, and maybe you think it is leaking, maybe it is just condensation when it is cold.

This one has to be replaced by a new one.