-
Anonymous users2024-01-231.If the toilet seat you buy is not a zipper or pasted product, you need to put the toilet seat at the lower end of the toilet lid first. The harder side of the toilet seat is fixed on the inside of the toilet seat, and the softer side passes through the entire toilet seat and covers the toilet seat.
Or you can install the toilet seat from the top end of the toilet lid to the bottom, and the method steps are consistent with the above diagram.
2.If it is a pasted toilet seat, the installation is very simple, and you can put it on the manual by yourself. Tear off the toilet seat wrap, stick it on both sides of the toilet lid in turn, and smooth it out with your hands.
This kind of product is relatively cheap and easy to take care of, and it is currently the most popular toilet seat product.
How to choose a toilet seat.
1.First of all, we need to look at the material, when we buy, try to choose a toilet seat with thick material and high hardness. The toilet seat of this material will bring us a good toilet experience and make the toilet seat more flat.
If we choose a slippery material, it is easy to slide during our use. This makes the use experience uncomfortable, and at the same time, it will be unevenly stressed, which can easily cause the toilet seat to crack.
2.The bathroom is humid due to the fact that there is a lot of water vapor. When the weather is warm, it is very easy to develop bacteria.
Therefore, when we buy, we must consider the breathability and antibacterial function of the toilet seat, and we can consider purchasing new materials, such as bamboo charcoal material, fiber textile, etc., which are more in line with the use of bathroom space.
3.The last point is that you need to buy according to the model of the toilet used at home, so as to avoid the toilet seat that you buy back and cannot be used. It causes trouble and wastes money to buy again, so after we know the toilet model, we come to buy the toilet seat product we like.
How to set the toilet mat: flip the toilet mat over, reverse side up, pull the inner layer of the toilet sleeve from the toilet seat outward, flip it over, and wrap the entire toilet seat. >>>More
There are plastic screws connecting the toilet seat at the back of the toilet, just unscrew it and replace it. >>>More
Use a wallpaper knife to dissolve the glass glue and other objects around the toilet, you can remove it directly, and then see how the flange is, if it has been damaged, replace it with a new one, put down the new toilet by aiming at the drain, and then hit the glass glue to seal the ground for 24 hours without sticking water!
1. Elastic toilet mat: first place the toilet mat under the toilet lid, keep the seat upright, and then turn the inner ring of the elastic band out of the hole on the reverse seat, and pass the circle with the hard ring through the toilet seat as a whole to wrap a part of the lid surface. Then flip down the outer ring of the plastic tube and cover the bottom of the seat. >>>More
Replace one, or use the toilet mat as a toilet seat, pad it directly there, and put it up when not in use.