How high do you make the dry and wet separation glass door in the bathroom

Of course, the bathroom is very suitable for using frameless glass doors to do dry and wet separation, you didn't say how to quote the total price if you sell more and roll less square meters, you can only tell you the unit price, pretend to be lead, such as the glass door for the façade (must be equipped with tempered glass), what I learned here is the price of ordinary glass, the general glass is about 220 to 260 yuan per square meter, tempered glass will generally be a little more expensive, and the specific price is related to different regions.

Now it's generally controlled at about two meters!

The material of glass is made up of three main parts: the basic raw material, the flux and the colorant, as well as the decolorizer, the clarifier and the emulsion.

The basic raw material for glass making.

Silica is the most important raw material for glass production. The reserves of silica on the earth are very large. Silica is the main raw material for stone and the main raw material for making glass.

The silicon content of different stones is different. These materials are the most common in our lives.

flux. The melting point of silica is very high, and it is very limited to achieve this honor. The ancients tried to add some other substances, and when it melted, the temperature became lower. In addition, the silica melts very abruptly, and there is no filter transition stage that gradually softens during the heating process, and after fusing some other substances, the glass can be in various glorious states at different temperatures, and the glass can be effectively shaped and shaped.

This substance is the flux.

The flux is usually a raw material containing sodium oxide, potassium oxide, lead oxide, calcium oxide, barium oxide and other substances, such as limestone, feldspar, soda ash, boric acid, lead compounds, and barium compounds. (Sodium oxide can reduce the viscosity in the formation of glass, make the glass easy to melt, and play a good role in fluxing; Barium oxide plays a fundamental role with sodium oxide in the formation of glass; Tin oxide can increase the chemical stability and mechanical strength of glass; Lead oxide can increase density, improve serpentine, and have a special luster; Lead can make the glass have a large refractive index to light and a small scattering rate, making the glass more shiny and stable.

Clarifier. Some bubbles will appear in the process of making glass, and the clarifier used to reduce these bubbles is used. The main commonly used are arsenic oxide, antimony oxide and nitrate.

Emulsion. In the production of glass, the artist makes the glass opaque according to the requirements of the work, and the emulsion is the emulsion that makes the glass opaque. It can cause glass to produce crystalline or unfixed colloidal particles that differ from the refractive index of the glass itself to produce an opaque effect. Commonly used emulsions are tin oxide, antimony oxide, and phosphate.

Decolorizing agent. The head colorant is mainly used to eliminate the undesirable color brought by the impurities in the raw materials to the glass, so that the glass city is colorless and transparent. There are two main types of chemical decolorizing agents and physical decolorizing agents, and chemical decolorizing agents usually disappear through oxidation, mainly sodium nitrate and potassium nitrate. Physical decolorizers make glass colorless by producing complementary colors, mainly manganese dioxide, selenium and cobalt oxide, and bromine oxide.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.