Do you have to plug the two holes in the base of the Kohler toilet

Updated on Toilet 2024-03-10
1 answers
  1. Anonymous users2024-01-23

    Toilet leakage, you have to check where the toilet is leaking 1, toilet inlet hose 2, toilet tank 3, toilet base around These problems should actually belong to the installation problem Find the installation master to get it If it is not the above 3 local problems, then you can call Kohler's customer service phone and let them come to the hail and empty tong detection.

Related questions
5 answers2024-03-10

Place the toilet against the wall, and the hole facing the drain is the drain hole, blocking the other hole.

15 answers2024-03-10

A siphon toilet with two holes should be a jet siphon toilet. >>>More

2 answers2024-03-10

It is recommended to find a merchant who sells this toilet to solve the problem - choose to plug it with a special material, or replace it with a suitable one. >>>More

5 answers2024-03-10

This is a very brain-dead design: press the big flush to poop, use a lot of water; Rinse the urine according to the small one, and use less water. In actual use, it is not practical at all, and the vast majority of people press two at the same time, so as not to cause blockage due to the fact that the stool cannot be washed away at one time. >>>More

1 answers2024-03-10

The two holes under the toilet allow you to choose a distance of 30 or 40 cm from the wall, and the other one can be mixed with pure cement after selection, kneaded and plugged up. But when buying a toilet, the merchant is blocked. You don't need to block it yourself.